It's not very stable and crashed into the printing area and jam the machine after 18hours of print edit: There is a mechanical failure during rapid travel moves from right to left (when not printing it moves fast!). When the toolhead moves without printing, the filament becomes loose. It is pulled into the internal machinery instead of staying in the guide tube. This loose filament enters the print volume and jams the XY motors and belts. The machine (Bambu Lab P2S) does not detect this jam. It continues to move while the motors are blocked. This could lead to permanent hardware damage. Overall, this is a great model, but this specific issue is a significant concern. And that's why I give it a 4/5.

开孔有一点小，建议105%打印

这个倒着的版本很好的解决了充电的时候的standby显示问题。为啥小米不能给个设置把这个改一下？

支撑的位置有点高，手机竖着放不太稳

很好的模型使我旋转 外面用白色打印的情况下，框架也最好选用白色。不然就有点透明黑色会印出来

重心有点靠后，最好把机头加个修改器然后调高填充。不然前轮直接翘起来