Samurai Cat – The Silent Warrior by Catmania3D

Catmania3D

Art>Sculptures

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

0.2mm layer, 2 walls, 15% infill

Designer

3.4 h

1 plate

4.9(161)

50% P1S/ 0.1mm layer, 4 walls, 20% infill, Support Enabled

1.5 h

1 plate

4.6(25)

200mm Tall Optimized/Minimized Supports - .12 Layer 4 Walls

7.8 h

1 plate

4.9(7)

Open in Bambu Studio

Boost

1482

2363

234

225

2.4 k

1.4 k

Released

Description

Meet Samurai Cat, a fearless and disciplined warrior with an aura of quiet strength. Inspired by the legendary samurai of Japan, this sculpture captures the essence of precision, honor, and calm determination. With its poised stance, traditional flowing robe, and a finely detailed katana held firmly in both paws, this feline warrior radiates power and focus.

Every detail, from the folds in the robe to the firm grip on the sword, tells a story of patience and skill. The cat’s serene yet commanding expression reflects the unwavering resolve of a true samurai, ready to defend its honor at a moment’s notice. Whether you're a lover of Japanese culture, martial arts, or simply appreciate sleek, unique designs, Samurai Cat makes an excellent addition to your space.

Comment & Rating (234)

@Adedisek_5768

Print Profile

50% P1S/ 0.1mm layer, 4 walls, 20% infill, Support Enabled

There was a problem with sword and head.

@3DPrintConcepts

What was your problem ?

@Adedisek_5768

Replying to @3DPrintConcepts :

Sword is wavy and head have visible layers.

@3DPrintConcepts

Replying to @Adedisek_5768 :

Ow i diden't had this issue but i will look intro changing my profile and optimizing it!

@user_20940614

Boosted

Came out perfect.

@DogBark

How?!!

@user_20940614

Boosted

Are you asking how did it come out perfect ? Printed on A1. Just pressed print and its perfect. Did not change the settings. 🤷🏻‍♀️

@fidgetkitty

Looks awesome, im kinda new to this hobby and was wondering what i could do to sharpen up the details? like on the blade and hands. Thank you!!

@DT62

So, I'm not very good at this and there's a lot of people that may chime in with better advice so take my word with a grain of salt. My troubleshooting with prints is generally fail-change something-fail- change something-fail- repeat until success. I think the easiest first step would be to make a shorter layer height. I'm assuming you are using the default 0.20mm layer for this. Try using 0.16 High Quality or 0.12 High Quality presets. I included a snip below of what it looks like in Bambu Studio. It also looks like you may need to slow down your speeds. You can go into the filament settings in the slicer and lower volumetric speed, that is the easiest way. Try lowering the speed to 10 for this filament. and see what you get. If you want to test these settings without wasting too much filament, try slicing the model using the cut tool in Bambu Studio and just do a test print with the head section and or sword and see if it fixes your problem. Don't even bother to let it finish all the way, cancel the print once you feel confident the issues are fixed and you can discard that test and start printing the full model. Edited to add: looks like you are using silk filament which I've always found difficult to dial in. As long as you have the budget to waste filament, don't be afraid to jump in the slicer and start playing with settings. That's my absolute favorite part of this hobby- the price of failure is super low. This makes me feel empowered to try new things and fail at them until I learn what works and what doesn't.

(Edited)

@fidgetkitty

Replying to @DT62 :

will def try these tips! thank you for your reply!

@Slyder2k6

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Turned out great I'm generic black pla.

@BattCave

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Brilliant sculpt. I really fine tuned a profile for this one at 200mm tall and am thrilled with how it came out so I shared it to your model page. Really well done sculpt. Will get you some boosts when I get more.

@catmania3D

thanks a lot!

@umbrella

Print Profile

50% P1S/ 0.1mm layer, 4 walls, 20% infill, Support Enabled

First mini I've painted. Such a great little model. Thanks.

@3DPrintConcepts

Looks SO cool! Good job!

@pbgran

Print Profile

50% P1S/ 0.1mm layer, 4 walls, 20% infill, Support Enabled

very cute!

@3DPrintConcepts

Cool place!

@user_277608226

Boosted

Hi, I love this, thanks so much! I'm having an issue with the end of the sword- tried 3x and same result. Haven't tweaked any settings as I'm a beginner at this and don't know anything lol. Any suggestions would be appreciated- Cheers!

@user_277608226

Boosted

I'm doing this one with a PETG-HF: 50% P1S/ 0.1mm layer, 4 walls, 20% infill, Support Enabled

@user_575134772

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed the sword and the eyes red 🤩

@apsk121

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(3)

Description

Comment & Rating (234)

License

Related Models

The Warrior's Fury

Dwarf warriors

Ukrainian warrior with trident

ancient eastern warrior silhouette