Search models, users, collections, and posts
Bio
Hobbyist
Achievements
MakerWorld Guardian
Active more than 20 days out of last 30 days UTC time
I was playing around with another design that i wanted to hang on the wall; and i wanted to scale it into different sizes. That would lead to the mounting hole I made also being scaled, which I did not want.
The solution: A keyhole screw mount negative model. And with it, a adjustment tool to get the screws just the right way.
Keyhole screw mount - negative and adjuster
53
151
Share
0
0
0
Fits perfectly! I have not test tested if it has better hold in the AMS for when the spool is nearly empty.
Share
0
0
0
Looks good! I removed the front plate of the first build plate, and printed the one on plate 3 instead. I didn’t have any M2.6 self tapping screws, but regular M3 also works! Would be nice if the bottom part of the holder was a little shorter, so that my back camera wouldn’t be covered.
Share
0
0
0
Fits gridfinity perfectly. I printed them without the different colored brim. The print paused by it self near the end, and displayed paused by user; don’t know it this is caused by the profile or not.
Share
0
0
0
Very useful print profile for when I have the IKEA Alex drawers. only comment I have is that the spacers are approximately 2mm too narrow, so there is still a little wiggleroom in the drawer.
Share
0
0
0
Great and useful design. Fits perfectly on the side of the printer. I printed it using Polymaker Polyterra Pls Matte Charcoal.
Share
0
0
0
Printed nicely! I think it is perfectly fine printing parts like this with a larger layer hight than 0.2, as it only needs to be functional not very detailed. I had some issues with jamming in the AMS that caused a 9 hour pause and bad layer adhesion at one point, but that is not the profiles fault.
Share
0
0
0
Turned out great, only had to select material, and off to the printer it went.
Share
0
0
0
No more data