Quality3D

giamma933

Print at 100% infill with a layer height of 0.013mm with a base layer of 0.16mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Matte Dark Red Transmission Distance: 1.5PLA BambuLab Basic Yellow Transmission Distance: 6PLA BambuLab Basic Jade White Transmission Distance: 4Swap Instructions: ( all filaments are from Bambu)Start with BlackAt layer #6 (0.56mm) swap to Dark Red At layer #7 (0.56mm) swap to Yellow toughAt layer #9 (0.8mm) swap to Jade White for the rest.

Lord of the rings hue forge final

hue forge

9percent

Can be used for more than just avocados of course."Chair" needs support.=======================Hanger has been updated to version 2.The components have been divided to improve stability during printing.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/431972/2023-12-17_74ea36305e1c6.jpg"> ======================= 2023/12/30 “hanger” parts of Version2__.3mf file has been changed. (size of the parts changed from 100% to 120%) I found a my mistake in the 3mf. The size of the "hanger" part was small and the "chair" part will touch the ground.

Hanging chair for avocado

random

3D design shop

This is a flexible, Baby dragon It prints in place with no supports.with a flexible head, arms,legs,body and tail!&nbsp;assembly is the wing but is just click on,&nbsp;&nbsp;Otherwise try to check the new version of the same dragon <a target="_blank" href="https://makerworld.com/en/models/81584#profileId-86859" rel="nofollow noopener">https://makerworld.com/en/models/81584#profileId-86859</a>&nbsp;&nbsp;enjoy .

Flexi Baby dragon- multi color

Dragons 

GlennovitS 3D

Modern salt and pepper shaker set in nordic design. Their profiles matches perfectly, and makes a nice set to put on the table.Print and use in the kitchen, on the dinner table or use as a present. Enjoy yet another free design.<h2>Overview</h2>The shakers come in 2 sizes:<ul><li>Default</li><li>Small</li></ul>In each size, there are 2 shaker styles:<ul><li>Salt (the big top)</li><li>Pepper (the small top)</li></ul><h2>Assembly</h2>This is really simple:<ol><li>Fill the bottom parts with salt or pepper (or whatever you like)</li><li>Screw the top on</li></ol><h2>Print instructions</h2>You can use pretty default settings. But here is a few tips:<ul><li>Speed: Slow down the first layer speed to ensure that the holes are printed perfectly.</li><li>Layer height: 0.2 worked fine.</li><li>Supports: No - designed to print without supports :-)</li></ul>Happy printing!&nbsp;<h2>⭐️ Want to show your support? </h2>You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D</a>

Salt and Pepper Set (modern shaker kit)

camping

planpa3d

A Mario style ghost floating around, suspended by his enormous tongue! Haha&nbsp;Check here for the King Boo M&M stash pot version, <a target="_blank" href="https://cults3d.com/en/3d-model/art/king-boo-m-m-container-stash-pot" rel="nofollow noopener">https://cults3d.com/en/3d-model/art/king-boo-m-m-container-stash-pot</a>Been wanting to design this ghost for awhile, but wasn't able to come up with an idea to get it to float around until now. The tongue makes the perfect stand for this Amazing module.&nbsp;Split the main ghost in two easy to print pieces. Orient the flat spots on the build plate and other than the supports for the pin holes no other supports are required.The mouth insert and tongue print out and fit great at 100% or what ever scale you desire.The eyes can be a bit tricky to pop into place, Study the module around the eyes and orient them correctly, placing the bottom part of the eye in place then pushing the rest in with a pen does the trick for me. If you have too much difficulty popping them in place try scaling them down 1%&nbsp;Make sure to put the mouth insert in place before attempting to press the teeth in. It just makes thing easier. The teeth should fit in fine printed at 100% but once again, if they are too much trouble try scaling them down 1%Thanks for checking out my design!!UPDATE 1/10/22 Added a loose fit teeth file. if you are haveing problems fitting the regular teeth in the model try this one with added tolerances. hopefully this helps.You can follow me on Instagram, <a target="_blank" href="https://www.instagram.com/pla.n.pa/" rel="nofollow noopener">https://www.instagram.com/pla.n.pa/</a>to find out what I designs I am currently working on&nbsp;If your interested in selling prints of my designs, become a Patreon supporter here… <a target="_blank" href="https://patreon.com/planpa3d" rel="nofollow noopener">https://patreon.com/planpa3d</a>

hue forge

random

Dragons

camping

Halloween