This model is based on these two models: https://makerworld.com/en/models/439515#profileId-345101 https://makerworld.com/en/models/773238#profileId-709368 I wanted to use my Xiaomi humidity meter V2 with my Sunlu S4 mounted in the center. It is recommended to print in PETG, but I did not have so I printed in PLA to test.

This model was printed with 0.2mm nozzle as I want to try it for the first time and took 20 hours, with a 0.4mm nozzle the time is reduced to about 5 hours