此为在@Nunu1215 设计的易生S4耗材干燥箱湿度计挂架基础上修改为适配小米蓝牙温湿度计2代,通过边框的弹性触点使得安装稳固,如果您在安装小米湿度计时觉得过于紧实,可按图示位置用小刀切开凹陷处的缝隙,为尽量减少打印支撑,此处设计了层高为0.2mm壁厚0.4mm的单层墙用以支撑上部结构,当切开图中6处接缝后弹性触点可获得更大活动空间,以解决安装阻力过大的问题。
This model is based on @Nunu1215`s design of hygrometer brascket for Sunlu S4 FilaDryer, I modified the model to fit the Xiaomi Bluetooth hygrometer 2nd generation. Through the elastic contacts of the frame to make the installation stable, if you feel too tight in the installation of hygrometer, you can use a knife to cut the gap in the depression according to the position shown in the figure, in order to minimize printing support, a single-layer wall with a layer height of 0.2mm and a wall thickness of 0.4mm is designed here to support the superstructure, and the elastic contacts can obtain more activity space after cutting the 6 joints in the figure, so as to solve the problem of excessive installation resistance.