all 3 print profiles and sizes came out well.

the large egg printed excellent and the threads were perfect well done

printed the small eggs and they went together reasonably well. some needed some convincing and opening and closing a bunch of times helped not sure if these are just scaled down as I didn’t look closely, but having more defined threading on the smaller eggs would be nice as my kids are having an issue opening them the scales on the egg line up well when tight, just a little harder to open great model. thanks for sharing

so far so it is building quite nicely had an issue with a number and it cause a couple of others to move. I went and paused and pulled the bad ones off and went to choose skip and Bambu said it could not due to amount of objects this is not an issue with the print so much as an issue with the software I would like to make a suggestion/recomendation for the covers that have the skills on it. I know there is a build you made that we can customize it. I would like the option to be able to insert a custom tab(s) and it would make the skills cover more versatile instead of potentially needing to print several skill cover plates if something changes. just a thought again I think this is very well thought out and engineered. I will add more pictures as I finish the build. I kinda have to wait to get the other door and the bottom piece as I thought I had a second spool and realized I used it up a while ago thanks for sharing

printed well. stacks well

was not really sure what to expect. it fits the army paints great and as discription says, does not fit Vallejo paints. currently only have it base coated with white. Will throw the speed paint on once dry thanks for sharing

as far as rocks go this is a well made rock. heh

my daughter said she needed some teeth printed for a school project. the are using a styrofoam manikin head. they cut a spot for the mouth they didn’t want it with the gums making this easier. they didn’t want all the teeth loose, so I added some cubes and sized them down I made top right, top left, bottom right, bottom left as sets so they could adjust as needed i obviously sized this down. I sized them down to about 25%. just kinda a guess without actually measuring for more accuracy. I think they look great. I will get her to take a picture of the teeth in place I printed on X1C with .4mm nozzle using Bambu Basic Ivory thanks for sharing

this is a decent model. printed nicely. a little stringy around the sword. may add this to my warhammer quest stuff for the Britannia Knight character thanks for sharing

did this as a test. printed quite a bit smaller to see how it would look came out well. very quick print. no issues at all thanks for sharing

so far the first thing I have printed is one of the containers it printed well. I did a bit of filing to smooth the top a tad. likely due to the filament Bambu Silk+ Rose Gold. for the container I would have liked something to hold the cards from moving. that being said. it’s an ingenious way to keep the size of the container as small as possable and still have the cards with it

nice print. I decreased the size to use for a game. the legs were a bit weak because of that. used crazy glue to reattach. no fault of the model. it might have been better to make the bottom solid and onto the print plate. it was a bit messy under the skulls printed this with Bambu Matte Ash Grey on a .4mm nozzle with .08mm layer height thanks for sharing

I did print this quite a bit smaller than original. due to the size, the swords around the top came out quite fuzzy and failed. that is 100% due to the print size and not the model I think with a resin printer it would have no issue with the smaller size printed with Bambu matte ash grey

this printed quite well. I changed the size quite a bit. I made the whole thing smaller. Because I could adjust the blade from the hilt I made it thicker to help with strength. I made the insert longer to make it visible inside the handle blade I did in Bambu Ash Grey Handle I did with Bambu Metalic Green the insert I did in Bambu silver

I printed this significantly smaller than the original I had to make some edits but it came out well I printed this with .4mm nozzle with .08mm layer height on Bambu Matte Ash Grey

I only printed the knight and I made it quite a bit smaller than optimal for high detail. I was hoping this would be still good enough as a replacement for some game pieces the base is about 8mm and height about 17mm printed this with Bambu matte Ash Grey using .4mm nozzle with .08mm layer heights thanks for sharing also some people are using a rub on paint/wax? never seen that stuff before. I would have just done a dry brush and layering

printed without an issue only problem is lining the egg up with duel filament is misaligned. when you put the egg on before licking it, the colour matches. when you lock it the colour is out of alignment. I going to print a couple to see what the best alignment is this is overall a nice model. thanks for sharing it