Fabrice

Philips Walita Knob

NFC Tag Reader: ESP8266/32-C6/C3 Supermini + PN532

Multiboard push fit coffee cup holder

Dremel 220 Soldering Iron Adapter

8 mm - Triple Offset Snap (DS Part A)

Looks great, my only complaintg is that the magnets are fiddly to insert and the whole thing is quite flimsy and can fall apart very easily but hey it's pretty easy to put back together again. 
I printed in PLA Matte and looks really good.

LemonArts

Magnetic Puzzle Plane

0.16mm layer, 2 walls, 15% infill

Really useful print and works great with PETG but I wondered why the base could only be used in one direction so I modified it to work in both vertical and horizontal orientations.

Given the licensing option though, I can't share my mod here.

3D Lab

Soldering wire holder

PETG  , ONE PLATE - 0.2mm layer, 4 walls, 20% infill

Good little Pi case. I had to reprint due to my fillament being wet. The first one didn't look good and was stringing. I also moved the seems to the back which I think gives better strength to the little fins that broke easily on the first print. 

irondog3D

Raspberry Pi 4B Case V2

0.2mm layer, 3 walls, 15% infill

I needed a food recycle bin and you gave me one. Thanks for the great design, it looks fab.

I did have a few issues though and may be due to using ABS and no supports. 

I added an extra 2 walls for sturdiness and am happy with that but I didn't use supports and ended up having to sand down the bottom of the main bin as it was rough and stringy. 

I also had internal stringing on the lid which I fixed with some PVC cement as I wanted a smooth finish to avoid surfaces which could facilitate bacteria growth. I guess with careful tuning I could have avoided this.

The only thing I would change in the design would be that the handles are prone to coming off. I fixed that by printing some plugs that I glued into holes that I drilled into the handle. I would have printed threads and screwed them in so that the handle can be removed if needed.

All in all I'm happy with the result and was able to make it work for me.