Favourite mini spool. Prints fast, easy to use. Fits back in the box that come with Bambu Refills. Only thing is I wish it had a viewing hole on both sides so that it it's viewable from any AMS-Lite position.

After some testprints I decided to remove the diagonal test and rearrange the texts for a .2 nozzle. Very pleased with the result!

Printed great, works like a charm.

Does the job, but mine was a bit too loose. I might want to scale it up slightly and try again.

The nun was a GREAT model for a 3D version of an existing boardgame I'm working on. (Nuns on the Run). Per your license I will not share it as a free remix once the full game is 3D and keep it as a personal use mini. But I still wanted to thank you and share the result as a photo!

So glad I found this design. Printed great, seems to fix all my AMS related extruder errors. I tried fixing my AMS for days, completely took everything apart. No results. But found all I needed to do with every color swap was straighten out the PTFE tubes. So found this and works amazingly.

Prints beautifully. I used Matte terracotta and Matte Bone White. Mechanism works great. Only minor gripe is the "stop" pin. Would have preferred a small pin that went through the complete frame which can be pushed and pulled in and out of the way. Current pin is a bit hard to remove and easy to lose. Some minor tips for those printing: You can print 3 frames at a time when printing for square. You can also easily put the white gears inside a frame on the plate to print them simultaneously(if you want them to be the same color obviously). For those struggling with pushing the inner frames in: There's a very small slot in the outer frame for the inner frame to fit snugfly into.. Make sure you have the side of the inner frame facing you with a small ledge. it will click right into the slot at the front of the outer frame. Don't fully press the inner frame into the back of the outer frame, only put it into that small slot.

printed fine, works as advertised. But I dislike how sharp all the edges are. Having beveled corners on all the hard edges (except the inner ones obviously) would have made it much more pleasent to handle.

Works great!