Printed very nicely and works fairly well. Pros: - prints on one sheet - connects easily - is sturdy under full load of cans. Cons: - The bottom row doesn't self-feed as nicely without the pressure from having it half-full. The angle for the bottom needs to be a bit more severe from back to front. Adding a shim doesn't work because it then makes the top not work as well. - Alignment is important and not forgiving. Maybe adding some partial side fins to the top front to "align" incoming cans?

The base print worked okay, but moved a bit. I used scale to add 5mm to the overall width only and the result fit perfect in the trays I got in the U.S. (pictured).

Much more effective rail lubrication with this. Printed perfect and great on first use.

Printed in PETG with the A1 profile. It came out very nicely! Love the idea to split the sides for flexibility. I was able to clamp it pretty tightly without anything breaking or deforming. Works great for my cleanup / print removal spot. I pushed it using a thicker resealable bag from Inland PLA+ leaving the ziplock top. The clips struggled with my sloppy bunching and thicker bag material because they have a small ridge to register. Supplement it with two small binder clips as shown.