Printed on a Bambu Lab H2C with Bambu PLA Basic Forest Green and Textured PEI build plate. I had to disable spaghetti detection after it kept pausing the print.

Printed on a Bambu Lab X1C with Bambu PLA Basic Silver, and a Darkmoon 3D G10 build plate.

Printed on a Bambu Lab X1C with Polymaker HT-PLA Yellow, and a Darkmoon 3D G10 build plate.

Printed on a Bambu Lab X1C with Bambu PETG Basic White, and a Darkmoon 3D G10 build plate.

Printed on a Bambu Lab X1C with Bambu PETG Basic White and Gray, Sunlu High Speed PLA+ 2.0 Gray, and a Darkmoon 3D G10 build plate.

Printed on a Bambu Lab X1C with Bambu PETG Basic Black and Gray, and a Darkmoon 3D G10 build plate.

Printed on a Bambu Lab X1C with Bambu PLA Basic Pink and Silver, and a Darkmoon 3D G10 build plate.

Printed well in PETG and easy to color by changing filament by layer A sample of what I've printed so far for the 2025 Christmas Print Drive

I repainted the model to be a simple, two-color print to save time but still give the engines some detail (thinking the children could color in the rest) A sample of what I've printed so far for the 2025 Christmas Print Drive

I printed this in both PLA and PETG and the split version allows for easy multi-coloring of the tires A sample of what I've printed so far for the 2025 Christmas Print Drive

I printed this in both PLA and PETG and the split version allows for easy multi-coloring of the tires A sample of what I've printed so far for the 2025 Christmas Print Drive

Best printed in PLA as I had issues with overhangs using PETG A sample of what I've printed so far for the 2025 Christmas Print Drive

Printed on a Bambu Lab X1C with Bambu PLA Basic Black, Yellow, Orange, and White, and a Darkmoon 3D G10 build plate.

Printed on a Bambu Lab X1C with Bambu PLA Basic Orange, Mistletoe Green, Beige, and Black, and a Darkmoon 3D G10 build plate. I went with the multi-part version and sanded the mating surfaces with 200 fine grint sandpaper before cleaning with IPA and glueing with super glue gel.

Printed on a Bambu Lab X1C with Bambu PLA Matte Black and Basic Beige, and a Darkmoon 3D G10 build plate. I printed the model twice, at both 100% and 50%. The smaller print required some gentle massaging to loosen up the legs and they mostly just go up and down.

Printed on a Bambu Lab X1C with Bambu PETG Green, Yellow, and Gray, and a Darkmoon 3D G10 build plate. No changes were made to the downloaded 3MF file other than cloning and moving objects around to be able to print 2 at a time. The nozzle kept dragging over the grid infill, causing poor print quality, but it didn't seem to affect the overall aesthetics of the finished print and any imperfections could easily be blamed on the material choice instead. The Bambu PETG (the old, discontinued formula) was dried for 8 hours at 65°C. It might have needed more drying time. Overall I'm very impressed with the design of this model and will try similar models from the creator in the near future. I may however try switching to Gyroid or Adaptive Cubic infill on the next batch.

Printed on a Bambu Lab X1C with Bambu PLA Basic Bambu Green, and a Darkmoon 3D G10 build plate. It's difficult to tell the difference between the settings. Seems like the default 30 mm/s speed and 10% flow is correct for this filament. Maybe a faster speed like 40 mm/s would be better for a more matte finish.

Printed on a Bambu Lab X1C with Bambu PLA Basic Bambu Green, 0.16mm High Quality profile, and a Darkmoon 3D G10 build plate.

Printed on a Bambu Lab X1C with Bambu PLA Basic Silver and Bambu Green, 0.16mm High Quality profile, and a Darkmoon 3D G10 build plate.

Printed on a Bambu Lab X1C with Bambu ABS Black, 0.16mm High Quality profile, and a Darkmoon 3D G10 build plate.