Pumpkins

Tips for printing Multicolor:

• Filament: PLA
• Supports: Yes! (tree)
• Layer height: 0.2mm
• Wall loops: 3
• Infill: 15%
• Seam position: back
• Wall generator: -
• Detect thin walls: No
• Brim: Recommended
• BuildPlate: Smooth or Textured

New multicolor version (3mf)! This model is no longer pre-painted in the slicer – you can now freely choose which color goes where directly in your slicer for a better look and easier handling!

(Quick tip: identical colors next to each other won’t work – always place different colors side by side to avoid potential issues.)

----------------------------------------------------------

Tips for printing Multipart:

• Filament: PLA
• Supports: Yes! (tree)
• Layer height: 0.16mm
• Wall loops: 3
• Infill: 15%
• Seam position: back
• Wall generator: -
• Detect thin walls: No
• Brim: Recommended
• BuildPlate: Smooth

For the multipart version in the slicer, please check the names of the build plates. Each pumpkin always consists of 2-3 build plates!

Please first check which part goes where, and only then glue the pieces in the correct place.

-----------------------------------------------------------

Colors and filament I used (4 Color):

• PLA Matte / Grey
• PLA Matte / Orange
• PLA Matte / DarkGreen
• PLA Matte / Black

Or decide for yourself which colors and how many you want to use!

This model is very filament wasteful please keep that in mind! When you decide to print my multicolor Pre-Sliced (3mf file) I would recommend printing several models at once, not just one, to reduce waste! Or you can use my multiple parts version to avoid filament waste!

I used a 32x36mm led candle. Here the link for the LED candle:

https://www.amazon.de/dp/B01DVXDPRW?ref=ppx_yo2ov_dt_b_fed_asin_title

--------------------------------------------------------