This was exactly what I was looking for and it printed perfectly

some of the fit wasn’t perfect but might have been because I made it so large. too large in fact as she is bigger than the bluey I printed

these are so cool. might add a circle to put a tassle

very cute and I love that it’s in multiple parts but I had to reprint the head 3 times in various orientations to make it passable and even then the back piece WILL NOT GO IN. we tried scaling down. we tried not scaling down. we filed and filed and filed. we hit it with a rubber mallet (and broke the head causing anoitner reprint) and we settled for 85% of the way in and called it a day.

This model is amazing. My only complaint is the loaded in orientation for the cloak prints with all of the supports touching along the entire front of the cloak, which made the finish really rough and not really ideal for anyone not hand painting. I ended up gluing the head and legs on backwards since the back of the cloak looked perfect! I suggest if you are printing in color that you find a way to orient the cloak so that the front is as free of supports as possible and also maybe increasing the support z hop distance? I wasn’t going to reprint a 23 hour print though just for myself so I’m happy with my solution. also I couldn’t really figure out a way for the needle to fit in nicely. there is a weird divot that does not line up with anything. I made it work.

we built one and liked it so much we built two more!

we built one and liked it so much we built two more!

really great quality print. feels nice and high end. a little big for my needs. which I printed at 83% scale to hold just 1lb of coffee but still love it.

Absolutely love this set to go along with the children’s book I wrote for my daughter! everything printed perfectly and looks great. I love the detailing on the pasta box! She is only 15 months so I opted to print the “noodles” in red too to be the sauce since the poop is too small.

beautiful design

recommend an additional 0-4 dice if you ever read over 100 but otherwise great print

printed at 200%

these are so pretty and the different levels make the filament look different. so cool

word to the wise - the tolerances are VERY precise so if you want to try and glue it use a very small amount or be prepared for it to squeeze out everywhere. and maybe get over all of your fingers… and almost mess up an 80+ hour print… That is no fault of the designer though. great print. Exactly what I was looking for. Went with black ABS and translucent teal PETG.

printed great. fit perfect. No complaints.

overall an excellent print that I would highly recommend but attaching it was a challenge as there was not enough info provided in the post and you actually need to get longer screws to replace the top two screws and it took a lot of work and frustration to figure that out.

fast print exactly what we needed

works great