Print Profile(2)
Bill of Materials
Description
First, thank you to EzyCraft for providing inspiration.
Materials to be prepared: 5 Butterfly Papers, 5 Transparent Inner Pages, 1 Top Stand, 1 Bottom Stand, 1 Base, and Bambu LED Lamp Kit 001.
Assembly process:
1.Fold the Butterfly Paper according to the crease, in the order shown on the left of the figure below (The parts in the picture are not from this design, but the process is the same). Note that the second step is to bend the antennae, without folding. The effect of the finished product is shown on the right of the figure below. Repeat this step 4 times to make 5 Butterfly Papers.
2.Take out the printed 5 pieces of Transparent Inner Pages, bend them into the middle shape as shown in the figure below (The parts in the picture are not from this design, but the process is the same), and insert the bumps on the edges into the holes on the edge of the Butterfly Paper. After inserting both sides, complete the installation. Repeat this step 4 times to make 5 finished Butterfly Papers.
3.Install the Bottom Stand on the Base and the LED Lamp Kit 001 on the Top Stand, making sure that the wires are stuck in the slots and pass through the Bottom Stand and base. Install the Butterfly Paper onto the two stand, ensuring that the slots on the upper bracket correspond to the slots on the lower bracket. After installation, clip the wires into the slots on the lower bracket and place the remaining four Butterfly Papers one by one.
4..Complete the installation, power on, and enjoy your work!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (23)