#Troubleshooting There is another problem. When changing from black to white filament, the extruder head will move several times, but when changing from white filament to black filament, the extruder head will not move. The white filament is in the second position of AMS and the black filament is in the fourth position of AMS. The following short video clips when changing filaments 還有一問題由黑色轉白色燈絲的時候擠出頭會移動幾次,但當由白色燈絲轉黑色燈絲的時候擠出頭沒有移動的,白色燈絲是在ams第二位置黑色燈絲在ams第四位置.負上以下短片短片短片剪輯換燈絲的時候

#Troubleshooting I use the latest software of the X1C system. There is a problem. When changing the filament, the extruder head will move closer to the left. After the filament is extruded, the hot filament will stick to the left and cannot fall off. I would like to ask if other people's X1C will have the following situation and attach a video. As far as I remember, the extruder head should be closer to the right. 我使用緊嘅係x1c最新軟件,有一問題出現當更換燈絲的時候擠出頭會靠近左邊當擠出完燈絲後仲熱嘅燈絲會黏貼在左邊不能跌下想請問,下其他人的x1c會否出現以下情況並附上影片一則.我記憶中擠出頭應該比較靠向右邊多少少

There is another problem. When changing from black to white filament, the extruder head will move several times, but when changing from white filament to black filament, the extruder head will not move. The white filament is in the second position of AMS and the black filament is in the fourth position of AMS. The following short video clips when changing filaments 還有一問題由黑色轉白色燈絲的時候擠出頭會移動幾次,但當由白色燈絲轉黑色燈絲的時候擠出頭沒有移動的,白色燈絲是在ams第二位置黑色燈絲在ams第四位置.負上以下短片短片短片剪輯換燈絲的時候

I use the latest software of the X1C system. There is a problem. When changing the filament, the extruder head will move closer to the left. After the filament is extruded, the hot filament will stick to the left and cannot fall off. I would like to ask if other people's X1C will have the following situation and attach a video. As far as I remember, the extruder head should be closer to the right. 我使用緊嘅係x1c最新軟件,有一問題出現當更換燈絲的時候擠出頭會靠近左邊當擠出完燈絲後仲熱嘅燈絲會黏貼在左邊不能跌下想請問,下其他人的x1c會否出現以下情況並附上影片一則.我記憶中擠出頭應該比較靠向右邊多少少