Really nice design, thank you for sharing! Printed mine in PLA Wood Black Walnut and PLA Matte Black. The internal pins needed a little bit of sanding, but other than that, everything fit together really well.

Simple design that turned out simply great. It works well, is well designed and looks solid too. Nice work and thanks for sharing!

Came out looking flawless with PLA Matte White! This does not look like a 3D printed object, looks really clean. Well done on the design and print profile!

I printed a pack of 25 of these. They all printed well in PLA Matte White on the first go. Functionally, these work decently but there are some fit issues. There are certain filaments where the fit on the clip isn’t tight enough and they don’t properly catch on the filament at all. Then there are other times where they catch but don’t apply sufficient friction to keep the filament tight. I end up needing to crimp a small bit of filament sideways at the end in those scenarios.

I printed this wallet back in December 2024 and it’s been in my pocket every day since, contending with keys…still going strong. I’ve included photos of what it looks like now after months of use. I printed mine in PLA Matte Charcoal and also printed this in PLA Matte White and PLA Wood. All prints turned out great and functioned properly.

My third print on my P1S after a bench and some Katanas. Printed this for my son in PLA Glow and I was impressed with how flawlessly it printed, considering all of the organic lines. Well done, it got some good laughs.

This was my first ‘big’ print on this printer and it’s been such a wonderful addition to my set up. It printed out perfectly and looks great in PLA Matte Charcoal. I’ve been using this part for months now. Thanks for the good design!

Another great design that turned out fantastic. I printed this with Bambu PLA Silk+ Red and PLA Basic Gold and it looks great. The red streaks in the hair have a noticeable sheen which looks pretty sweet. My wife loves it. Thank you for sharing!

This is a nice design overall, excited to install this and see how it performs mechanically with the weight of the hose and everything. One thing to note though. I ended up cracking the hose connection port by using it as a handle while I was ripping out the support material. I would recommend printing this part in ABS or PETG, rather than PLA or at least reorienting the part during print or maybe both. I ended up glueing my crack, I think it will be fine.

As usual, beautiful design! This one printed great, I’m liking your use of the layers on this one. The way that you have the spider logo raised on this design looks really cool.

My son and I experimented with the colors on this one. We ended up using Bambu PLA Silk Two-tone Hawaii Blue in place of dark gray to give those middle highlights some sheen and it turned out looking pretty cool. Once again, wonderful design and print profile!

This ended up being such a sweet looking print! It’s a simple but effective design and you did a good job with your layers. The way you layered this ended up being perfect for your white layer because when you print the white layer with Bambu’s Glow filament, Luigi looks like he’s in a dark room with minimal lighting. I ended up using PLA Matte charcoal, PLA Basic Bambu Green and Bambu PLA Glow. Came out great!

My wife really loved this print, nice clean design and print quality! Using Bambu PLA Matte Red really seemed to make those red accent elements emulate that characteristic Disney red.

Another incredible design that turned out incredibly! I printed this in all PLA Matte colors and I’m really enjoying the vibration between the reds and blues. Normally the lack of light transmission in these filaments is a hindrance for Hueforge but they are working for me with this print.

Another beautiful design that printed flawlessly! I didn’t have yellow so I ended up using light gray instead and it still ended up looking great. UPDATE: I printed this again with PLA Silk+ Candy Red and Gold and it ended up looking really cool and gives the design a little extra aesthetic.

Wow, nicely done on this design and print profile! This turned out amazing, even in PLA Matte which isn’t as translucent as PLA Basic.

My son finds it hilarious that these were real warning signs back in the day. Thank you for making this available in such an easy to print format! It printed perfectly on the first print and it looks awesome. For anyone else printing, it is a little smaller than I was expecting, it’s about 6x4”. You may want to scale this up a bit so that it’s more along the size of a warning sign.

I was able to comfortably print 4 of these on a single plate on the P1S and all of the coasters ended up printing perfectly on the first print. Nice job on this design and on the print profile, these are a lot of fun!