I printed these with Polylite ASA in blue and white. The Shelly sits perfect in the mount and the fit on the DIN Rail is not too loose and also not too tight.

Printed this with PolyLite PETG. Works great.

Nice Design and printed without problems. I would have preferd if the bin wasnt split in two parts but I can see why its designed that way. I glued zhe two parts together so the inner piece dosnt fall out.

Practical, simple model, that printed fast and without problems. Only bad thing is that I use the 10ml loctite bottles and only realised fter the pront had finished...

Great model, printed really nice. Only the part with the bridging dosnt look perfect, but my filament wasnt perfectly dry and the small defect doesnt really bother me.

Great model, printet without problems!

Great model. I scaled it down a bit, thats why the corwn didnt print perfect. But its still acceptable.

Printed with Polylite ASA on my X1E. Turned out pefect.

For me this really is an upgrade to the AMS lite. Its perfect if you want to reduce the printers footprint. I printed the parts on my X1E with Polylite ASA. Worked perfect.

I printed these with PLA on my A1 mini. Turned out great!

I really like the Model. I printed these on my X1E with TPU for AMS. It printed quite well, I only had some issues removing some support. I would NOT recommend priting these from TPU for AMS, since that TPU is really hard and you cant avtually wear them. I will print another pair of these when my other machine, that is more capable for Flex materials is running again.

I printed the scraper with Polylite ASA. Turned out perfect and I really like that the screws are flush withe the scraper.

Fits the space in the AMS perfect and printed without problems in PETG.

Works great

Over all a nice model. The Seam placement isnt optimal and I think the tip would have looked better if printed with variable layer height.