I had somebody request my BMCU mount so here it is:)

I just thought I’d give y’all this tip that I figured out if you’re ever printing something and the printer gets paused or you leave power for a little bit and part of the print starts to detach or your bed gets set to the wrong temperature instead of stopping the print, What you can do is pause the print turn the bed back up to the correct temperature and set something heavy on top of it and just wait and it’ll stick back to the bed Sorry, I unfortunately do not have any before pictures As I was not sure if this would work, but it’s so far has:)#Questions #A1 #Bed Adhesion #Failed Prints #Printer Suggestions A1 #Help Center

#Questions does anybody know if it’s possible to add a motherboard fan on the A1 on the inside of the printer

Happy new year y’all 🎉🥳🎉🥳

By Request I am uploading my BMCU 370C PTFE2

updated Poll for my previous post #Questions #Sharing Makes

has anybody ever had this happened to them? I’ve never seen it happen. I woke up this morning. Come check on my three hour print that I started last night and I find this. thankfully, I was able to salvage it#Questions #Sharing Makes #Vote #Failed Prints

for anyone wondering the BMCU 370 C works on the latest A1 firmware which is 01.07.00.00 without any errors#BMCU #BMCU 370c #BMCU 370c A1(Edited)

This is my first model and has taken over 20 hours of work if you like it please boost and like:)

I an thinking about getting a BMCU 370 C do y’all think I should get it.

what setting should I print petG at with this? it is a frostbite Cryogrip pro(Edited)