Toolhead Cable Guide A1-mini
Print Profile(1)
Description
Designed as a support for toolhead cable, tried to make it as light and precise as possible.
The model might be useful for u if you're trying to mitigate any tension at any angle of a toolhead cable.
Weight of 1.2g and 0.05-0.1mm tolerance, and prints within 15 mins(depending on your settings)
You can use any settings honestly, it prints perfectly with 0.2mm layer height i used this as an experimental to see the tolerance but height didn't really affect the model, my example used 0.12 layer height for a smoother finish, which I really suggest. Also used 2 walls and 15% infill there is not much to infill, the model will be sturdy by default because of the thin walls.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (6)