Bambu Scraper Handle

2026/3/3 P2 wrench is not currently supported, the P2 wrench is a Torx type and will not fit, I will update soon

Three-in-one Bambu Lab scraper, uses original blades and original screws

Magnets: 6mm diameter, 3mm thick (no glue needed, just press them in)

If you feel the hole friction is too high, please sand it down slightly. I cannot guarantee consistency with everyone's filament, outdoor temperature, and humidity. If it's too loose, it won't hold; a little tight with slight friction is sufficient. Filaments expand and contract with temperature, and due to this characteristic, FDM accuracy is difficult to exceed a tolerance of ±0.1.
 

Special note: I've seen some guys selling my models, making a small profit is fine! But you have to give my work rockets 🚀, this helps me create better designs. If you list it on large trading platforms and make a lot of money, you must tell them this is a 'jerry and tom' design. Otherwise, I'll spank you so hard your mom won't recognize you. (If you have ideas you want to implement, you can leave a comment and I will consider them)

Recently, many people like this scraper of mine, and I often see 3 types of comments: ① The hole is too tight ② Magnets don't fit or there are no magnets ③ Concern that the hole might lead to insufficient strength. Therefore, I plan to fill the hole, adapt to common magnet sizes on the market, and add some multi-color textures.

Advantage one: Strong magnetic force, good adsorption effect

Advantage two: Can be hung on the door frame

Advantage three: Integrated wrench storage, not easily lost

2024/10/4 --- Magnetic scraper protective cover has been updated. To download separately, please click Scraper Safety Protective Cover by jerry - MakerWorld

The blade cover has been added to the profile, you can print it directly. If you find the blade cover useful, remember to click my avatar and download the blade cover to help me earn some points

2024/10/23 --- A safer blade cover has been updated. To download separately, please clickBambu Scraper Base Adapter by jerry - MakerWorld

The effect is as follows, this can save some magnet costs

2024/10/25 update: Regarding the wrench behind the scraper which tends to move around, a snap-fit design has been added. Updated the scraper to fit 6mm diameter 2mm thick magnets

Note: Because everyone has different magnet specifications, here we use 6mm diameter 3mm thick and 6x2mm magnets. If you have magnets of other specifications, you can leave a comment and I will upload a new model for you to adapt

Additionally: Recently, I've been too busy with work. I do read your comments, but I keep forgetting them, often staying up late makes me forget things. You can go toBilibili, send a video @ me, and I will reply to you with a video as well

Thanks for your help, everyone, you helped me get over 100 prints!!!! Haha, feel free to ask for any help you need! Happy!

Here are the awesome guys who supported this model, many thanks

Thanks to brother@user_1950979093 for the boost, thanks to brother@user_2184495991 for the boost, thanks to brother@Green. for the boost, thanks to brother@user_3059592026 for the boost, thanks to brother@user_3508222223 for the boost, thanks to brother@czj8433374 for the boost, thanks to brother@Taioes for the boost, thanks to brother@user_3657732437 for the boost, thanks to brother@user_1952127682 for the boost, thanks to brother@user_3427914600 for the boost, thanks to brother@user_2281611930 for the boost, thanks to brother@user_3766138710 for the boost, thanks to brother@user_3676411321 for the boost, thanks to brother@user_2087562268 for the boost, thanks to brother@user_2356668775 for the boost, thanks to brother@user_313339982 for the boost, thanks to brother@diction for the boost, thanks to brother@user_4263246536 for the boost, thanks to brother@user_750546750 for the boost, thanks to brother@yingdong77 for the boost, thanks to brother@wang_2385824 for the boost, thanks to brother@user_4040618915 for the boost, thanks to brother@Yalain for the boost, thanks to brother@user_1909347696 for the boost, thanks to brother@smallmj for the boost, thanks to brother@user_484434623 for the boost, thanks to brother@user_3119603867 for the boost, thanks to brother@user_1474191728 for the boost, thanks to brother@zwys0131 for the boost, thanks to brother@user_329148986 for the boost, thanks to brother@user_1126282246 for the boost, thanks to brother@user_329148986 for the boost, thanks to brother@zwys0131 for the boost, thanks to brother@user_1474191728 for the boost, thanks to brother@user_3119603867 for the boost, thanks to brother@user_484434623 for the boost, thanks to brother@RocketOne for the boost, thanks to brother@user_357279797 for the boost, thanks to brother@user_4225015916 for the boost, thanks to brother@user_3877999334 for the boost, thanks to brother@OOKIISNOW for the boost, thanks to brother@ccc495 for the boost, thanks to brother@user_3849686148 for the boost, thanks to brother@user_2230234397 for the boost, thanks to brother@user_4134822524 for the boost, thanks to@Atri.top for the boost, thanks to@user_3748144067 for the boost, thanks to@bwdwayne for the boost, thanks to@user_3748144067 for the boost, thanks to@bwdwayne for the boost, thanks to@fews for the boost, thanks to@user_3694998843 for the boost, thanks to@799771922 , thanks to@guagu365 , thanks to@user_797232761 , thanks to@user_3207347277 , thanks to@user_3813879101 , thanks to@XINYU