Search models, users, collections, and posts
RapidSpool – Bambu-Compatible Spool
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
3.5 h
2 plates
Open in Bambu Studio
Boost
5
23
1
1
17
14
Released
Description
RapidSpool – Bambu-Compatible Spool
Features
- 🪶Ultra-lightweight (84g): Print up to 11 spools from a single 1kg roll.
- 🚀Rapid Print Ready: Optimized for speed (PLA~2h 41m PETG-3h28m ABS-3h16m on P1S).
- 🔐 Authentic Twist-Lock: Retains the original Bambu Lab mechanism for reliable installation.
- 💧Built-in Desiccant Cavity: Store desiccant inside the spool for AMS moisture control.
- 📍60° Spaced Holes: Evenly distributed holes for easy and flexible filament tucking.
Printing Material Recommendation
This spool can be printed with PLA, PETG, or ABS.
For use inside AMS HT / AMS 2 Pro drying environments, PETG or ABS is highly recommended due to their superior heat resistance.
• PLA drying temperature: ~45°C
• PETG drying temperature: ~65°C- The PETG (71°C) and ABS (87°C) versions are fully compatible with the AMS standard drying conditions. For engineering filaments that require drying temperatures above 85°C, the ASA (100°C) or PC (117°C) versions are recommended to minimize the risk of deformation.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)