AXIS P32 Network Camera riser - customizable
Print Profile(1)
Description
Do you need to install your AXIS P32 Network Camera and need a little distance and angle from the eaves?
I had that problem and created this model.
You SHOULD use the customize option for this! The attached print profile is provided as example of my settings.
Select CUSTOMIZE, and set your parameters:
- Angle (set this to 0 for a flat riser with no angle)
- Height to the shortest side of the angle
This is for outdoor use so use appropriate filament! PETG, ABS, ASA.
I used Bambu ASA Gray
Print with standard 0.4 mm settings and no support.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)