Search models, users, collections, and posts

Hexshell Mini Pocket Pen

Runswithscssors
Household>Office
IP Report

Print Profile(1)

All
X1 Carbon
H2C
X1E
H2D Pro
H2D
X1
P2S
A1 mini
P1S
H2S
P1P
A1
X2D
A2L
Hexshell Mini Pocket Pen
Hexshell Mini Pocket Pen
Designer
1.3 h
1 plate
4.8(5)
Open in Bambu Studio
Boost
96
349
6
9
161
109
Released 

Description

Hexshell Mini Pocket Pen

An original pen design that quickly transforms from comfortable pocket-sized to full-sized by removing the cap and stowing it on the rear of the pen. The Hexshell texture provides excellent grip and is comfortable to hold.  

Features

  • Pocket-sized length of 97mm (3.81")
  • Full-sized writing length of 146mm (5.75")
  • Cap firmly snaps closed onto both ends of the pen.
  • Secure clip that provides firm retention to clothing.
  • Accepts common ink refills from multiple brands. Just insert and cut to length!
  • Backwards compatible with the original and the Hexcore mini pocket pens.

Purchased Items

Each assembly requires a ballpoint pen ink refill, such as these found here (non-affiliate link): https://a.co/d/7Q3lAtH

Printing Tips

  • Always clean your build plate with water and mild soap.
  • No Supports - All parts are designed to print without supports.
  • Brim - A brim is required for the barrel of the pen.
  • Recommended Material - PLA Basic and PLA Matte filaments. Good quality filament that demonstrates strong layer adhesion is a must. Dry your filaments before printing and/or bump your nozzle temperatures a tiny bit if you experience issues. 
  • If the snap fit of the pen barrel to the cap is too loose, make the following adjustments in the slicer:
    • Adjust the pen barrel's X-Y contour compensation in increments of 0.025mm
    • Adjust the cap's X-Y hole compensation in increments of -0.025mm
Make this adjustment for a firmer snap fit between the cap and pen barrel.
Make this adjustment for a firmer snap fit between the cap and pen barrel.

 

Boost Me (for free)

If you like my work and want to see more, feel free to give me a Boost!

Assembly

Each assembly requires one each of the printed components plus an ink refill.
Use an ink refill that is longer than 92.8mm (3.65"). Shorter ink refills will require custom ink caps.
Insert the ink refill into the pen. It should be a light to moderate press fit. Do not remove once inserted.
Use a utility knife to score the perimeter of the ink refill flush to the rear of the pen body.
Snap the ink refill pointing away from your face.
Slide the ink cap over the rear of the ink refill and into the rear of the pen body.
Firmly press the ink cap into place.
Insure proper orientation of the clip to the pen's cap.
Gently flex the clip and insert the inner post into the pen's cap. This should be a press fit.
Gently flex the clip and insert the outer post into the pen's cap. This should be a press fit.
The assembly is complete.

 

Membership

Commercial Licensing for these models is available for members.

Join

Revision History

2026-03-18     v1.0  Released.

pen
PEN
MINI
Mini
pocket
Pocket
mini pocket pen
pocket pen
ink refill
refill
small
tiny
hexshell
ballpoint
ballpoint pen

Comment & Rating (6)

(0/1000)

License

If you want to use this model commercially, please join my membership.
Join Now
This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Mini Pocket Container
Mini Pocket Container
Arc3dprinting
52.9 k
15.3 k
Mini Pocket Pen
Mini Pocket Pen
Runswithscssors
1.5 k
832
Mini duck
Mini duck
Beton_377751593
44.8 k
11.3 k
Mini Hexagon Fidget Toy
Mini Hexagon Fidget Toy
fifindr
40.8 k
6 k