The Loop Riser

This is my strong riser designed for raising the height of any object you want by 125mm (126mm with TPU base). I made it for myself to raise my vertical mounted AMS lite whilst retaining the useful space underneath. I have removed the small hole at the rear in the public release which I used specifically for a switch . 

It comes with a fitted TPU base for those that want the extra grip. This can be either seated in place or glued for a permanent fit.

External Dimensions are:

• 240mm wide (210mm usable flat top surface)
• 200mm deep
• 125mm height (126mm with TPU base)

Internal usable dimension below the riser are:

• 210mm wide
• 185mm deep
• 110mm height (111mm with TPU base) *minus a small amount of usable space in the upper left and right due to curve

I have designed it to print with strength in mind on my Bambu Lab A1. Orientation is with the back face on the build plate to have strength through the top surface to the side legs. 

I personally printed it at 0.16mm layer height for a beautiful finish in PETG-CF blue. I also opted for 3 walls and 10% cubic infill balancing strength and weight. With those settings the print totals to ~400g of PETG-CF and feels plenty strong for my use case. I recommend the use of tree (strong) supports for side arches at the top of the print. 

I love the clean look of this model and hope others enjoy and get use out of it. I'm open to feedback, improvements and modifications.