Foldable hook
Print Profile(2)
Description
An easy-to-print, foldable, multi-purpose hook for hanging items.
- The design is simple and requires no support.
You will need approximately 16g to 25g of filament.
- LIGHT version 16g of filament
STRONG version - full perimeter 25g filament
- Dimensions: folded state 76,2 x 53,3 x 10 mm (3 x 2.1 x 0.39 in )
unfolded approximately twice as much.
Tested with PLA or PETG filament.
NOTE: I wanted to minimize gaps so that the hooks would not have too much space around them at the attachment point and would not deviate too much from the axis. At the same time, I wanted them to be printed from a single piece without gluing or screws.
Therefore, try to follow the procedure below.
After printing, allow the hook to cool sufficiently.
Then adjust it for further use by turning it slightly.
Visit my page with another models or printer upgrades:
https://makerworld.com/en/@m_machota
Boost Me (for free)
If you like it and find it useful, I would appreciate a like or boost. Thank you very much!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (25)