Ice Dragon

All of the pictures displayed are of the actual models. Please take a moment to rate and endorse the models, as it is very helpful.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 178.88x180.47mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA PolyLite Grey Transmission Distance: 1
    PLA bambu cyan Transmission Distance: 4
    PLA BambuLab White Transmission Distance: 5
    PLA BambuLab Basic Black Transmission Distance: 0.6
This print uses 7 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Blue
    At layer #15 (1.28mm) swap to Grey
    At layer #17 (1.44mm) swap to cyan
    At layer #20 (1.68mm) swap to White
    At layer #32 (2.64mm) swap to Black for the rest.