Search models, users, collections, and posts
Achievements
MakerWorld Guardian
Active more than 20 days out of last 30 days UTC time
Pioneer Maker
Print successful 117 different models and 2,568 hours
The post is no longer available
Great tube. Thanks a lot.
I printed with PLA-CF for the outside and PLA+ for the inside. I was a little concerned about the carbon fibers. To be absolutely sure, I printed the inside with PLA.
Share
0
0
0
Großartig. Danke.
Gedruckt mit PETG MATT von Sunlu, H2C, 0,2 Düse mit einer Schichtdicke von 0,1mm
Share
0
0
0
Very practical box.
I've now installed the nozzles in the riser. Therefore, I've converted the nozzle inlay into a simple organizer.
Share
0
0
0
Thank you so much for the great riser. I've calibrated the shrinkage and compensation. The dimensions are a perfect fit.
Share
0
0
0
Fantastic idea! Thanks for making it happen. I used PETG.
I printed the connectors with a 0.6 mm nozzle.
The casing I printed with the 0.4 nozzle, which worked perfectly. With the 0.6 nozzle, I subsequently had problems removing the casing hinges without damaging them.
I won't be using the Knurls for now. The connectors have a conical mount for the rods, which I think is sufficient for securing them.
...now I just need to varnish the rods.
Share
0
0
0
No more data