Crawler ESC mount
Print Profile(1)
Description
Boost Me (for free)
The model is mainly for securing the ESC and organizing the wiring harness. The cooling fan used for the motor is a 40x40x28 12V one. It also requires four M3x40 screws to secure the fan, and some other types of M3 screws are also needed
I previously used a Weiheng 12V 1544RPM, which generated immense heat. This motor had too little power and an insufficient reduction ratio, making it unusable
Later, I switched to the same model at 160RPM
If you use another brand gearbox, as long as its height is no more than 33mm, it will work perfectly fine without any cooling, and the speed will also be decent
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)