杯瓶支架 cup bottle storagerack/holder by 3D_JJJMakerWorld: Download Free 3D Models

3D_JJJ

Tools>Organizers

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

0.2mm layer, 2 walls, 10% infill

Designer

147.9 h

14 plates

4.8(23)

Open in Bambu Studio

Boost

279

641

531

139

Released

Description

Content has been automatically translated.

Show original

Many friends have expressed a desire for varied dimensions to suit their individual needs, a request I regrettably cannot fully accommodate. Fear not! You can readily scale the model within Bambu Studio to achieve your desired measurements. Proportional or unidirectional scaling is easily implemented. For instance, if an 85mm internal diameter is required, simply enlarge an 80mm diameter design by a factor of 1.0625 to attain the target dimension. Remember to maintain consistent scaling ratios when stacking components and to preemptively assess whether your storage space can comfortably accommodate the assembled structure. I trust this guidance proves helpful. Thank you for your enthusiastic support

no supports

support free

Comment & Rating (39)

@user_2633275763

Boosted

I scaled it to 105%. It printed exceptionally well! It's incredibly stable, and stacking works flawlessly

(Edited)

The designer has replied

Show original

@3D_JJJ

Thanks for your feedback！Enjoy~~

@siimoneee1

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

A very solid model, excellent description. I use it for heavy glass bottles, it's optimal for that. The filament amount is then also okay. 👍🏼Printed with Sunlu PLA. Should there be a newer version, it would be great if the printing plates were labeled with their respective diameter. Boost definitely deserved. 🚀

Show original

@antlion88

Hello, I tried printing plate 6 and 8. Plate 6 printed perfectly but 8 keeps failing at the same layer. It gets knocked off the build plate. I wonder why.

The designer has replied

@3D_JJJ

Sorry to hear that. First of all, please check whether the printer can move normally in all directions at this height, and see if there is any foreign matter on the lead screw. Judging from the black model in the picture, it seems that there was a layer skipping during the printing process. I have also checked the model and the slicing, and found no abnormalities. However, at the position where you encountered the problem, there is a change in the seam position in the slicing. Although this is normal, could your abnormality be related to this? I'm not sure. But these models have all been printed and verified, and no abnormalities have been found. This size is also one of the most frequently printed models. I hope you can check and try again, and it would be best to pay attention and observe when printing at this position.

@X_F_O_R_C_E

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

The design inspires confidence. The print result is great! Thank you to the designer.

The profile uploader has replied

@3D_JJJ

enjoy bro～

@MicRas

Print Profile

0.2mm layer, 2 walls, 10% infill

works well but it little to small for vine bottles,

The profile uploader has replied

@3D_JJJ

Thanks for your feedback, if you wanna longger, you can extend it in BambuStudio.

@Chrisspanther

Print Profile

0.2mm layer, 2 walls, 10% infill

Superbly crafted. It is remarkably sturdy

Show original

@Stamic96

Print Profile

0.2mm layer, 2 walls, 10% infill

@zandarian

Love this design but is there any chance you could add an 85mm version?

The designer has replied

@3D_JJJ

Hey bro！thanks for your comments. I will consider your suggestion but now actually you can scale it in Banboo studio easily it also works~

@Chadyo

Boosted

This is fantastic, though very filiment consuming. They racks of same size stack perfectly ontop of eachother.

The designer has replied

@3D_JJJ

Enjoy！~

@semixhalf

Boosted

This is a tremendously helpful print for beer geeks: even 2x1 models stacked by 5 in height (being wobbly) do not result in bottles falling from them after some shaking. I've printed all sizes of models (except 1x1 ones) on different printers (and filaments), and they all fit together.

The designer has replied

@3D_JJJ

enjoy🍻

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Desk Cup Holder

Product 1

236

941

4.3 k

Tentacle cup holder

Mad power

557

2.5 k

3.9 k

bottle/cup holder

Fendt311

127

Bottle or Cup Holder

Chefkoch