davidkelly021

cover

Capture.JPG

plate_1.png

Screenshot 2025-06-10 164936.png

Capture.webp

0.2 layer height no supports optional brim

0.2mm layer, 2 walls, 15% infill

foofbug

IMG_6273_2a53ebbb-0fa7-4d7e-8e7f-dbff9d979c41.webp

plate_1.webp

I wanted to take the time to do a high-quality print of this model. Added a brim with a little larger gap to ensure time investment isn't lost if one segment gets knocked loose but that removing the brim is not too hard. Many of the layers are only .08mm high after enabling adaptive layers, 319 total layers and 11hrs 45 mins total print time on my P1S.

High-resolution and slow: adaptive layers, 2 walls, 10% gyroid infill, brim

Victor

Screenshot 2024-02-07 at 9.37.17 PM_ced2ff74-4745-4a16-bd85-a2db29ab2433.webp

Screenshot 2024-02-07 at 9.44.52 PM_f9f6c9e6-7fef-40f4-b092-699afac82ff9.webp

***4 HOURS 27 MINUTES*** 0.28mm layer, 2 walls, 5% infill

Grim

19897076-b8f0-4921-ab73-a5f0714f7a10.jpg

1208415a-dcc1-43f7-beba-f533833aeae7.jpg

da27e80c-58e3-482b-9d02-31eecde60dd6.jpg

fdfdfdfdfdf.png

A1 Mini Optimised Print profile for the max size dragon possible on the a1 mini , please ensure your bed is clean and adhesion is as good as it can be.

A1Mini Optimised ( sized to be max scale on the A1 mini) 

Macbambi

4dragons_2color.jpg

Vier Drachen auf einer Druckplatte. Zweifarbig.Druckzeit 12:48 ;-)

Four dragons on a single print bed. Two-toned.Print time 12:48 ;-)

4 dragons, 2 color, 0.2mm layer, 2 walls, 15% infill

matthewsmessmakers

Gemini_Generated_Image_sy3th9sy3th9sy3t.png

Modified colouring of the dragon including the eyes and the bottom layersPrinted on the X2D with the bottom layers/eyes on the aux nozzleShown in a Dualtone matte PLA from jayo

Print Profile(7)

Description

Comment & Rating (3861)

License

Related Models

aquatic dragon

Print Profile(7)

Description

Comment & Rating (3861)

License

Related Models