HoverFlow Tryx – Open Frame Edition

HoverFlow Tryx – Open Frame Edition

This is my second contribution to the Makerworld Challenge.
The HoverFlow Tryx combines a super compact open-frame layout, a full Tryx water-cooling system, custom wooden panels, and a floating magnetic fan that spins freely inside the open window. It’s a small but extremely detailed build that pushes the limits of compact PC design.

🔥 What makes this build special

• Extremely compact size: 272 mm × 229 mm × 459 mm
• Levitating spinning fan inside the open window
• Tryx water cooling from bottom to top
• Custom wooden frame with laser patterns
• Tight cable management → challenging but rewarding
• One of the smallest open-frame PCs without mini components

⚠️ Important Note

This build is only for large 3D printers with a laser module.
I did not create a smaller version because the frame must be very stable.
You will also need a laser for the wooden panels.
Scaling down is possible, but stability and fitting will suffer.

 

📦 Additional Details (short + compact)

• The wood pattern is NOT included in the 3MF.
  I added all engraving directly in Bambu Studio, where the laser power levels could be set.
  You can add your own patterns easily in the slicer.
• The 3MF files are included as requested by Makerworld so you can make your own adjustments.
• The wood panel file is linked separately and also visible on my profile.
• For clean edges, I filed off the dark laser marks manually.
• Required right-side display:
  AISHICHEN 11.26" Mini Monitor — 1920×440 IPS (HDMI + Type-C)
  (reference based on your uploaded image: /mnt/data/Bildschirmfoto 2025-11-25 um 21.56.18.png)
• Wiring pictures are included above so you get an idea of the internal setup.

❤️ Support