Print Profile(1)
Bill of Materials
- Wall Screws x 8: Whatever you have, I used 4.5x40
- Wall Plugs x 8: 6mm
- Short Wood Screws x 4: Just to hold the shelf board to the arms, you could use glue instead.
- USB Powerbank x 1: I will not share the one that I used because it turned out to be garbage
Description
I needed a folding shelf. I made this with a old IKEA draw front. Shelf board is 160mm deep and 16mm thick, any length is fine.
I don't expect anyone to ever make this so I am light on instructions, but feel free to ask if you want to know anything. See BoM below for additional parts. Print the wall jig to help line up holes, and the shim if the folding arms are not level.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)