Just finished my Idris Display Model – Aegis Dynamics Capital Ship STL Assembly.This is a display-ready sci-fi capital ship model mounted on a custom stand with a front nameplate reading Aegis Dynamics - Idris. The model is designed as a premium desk or shelf display piece, with the ship supported above a clean rectangular base for a collectible showcase look.Included: Detailed Idris-style spaceship model Custom display stand Base with nameplate STL assembly files Display-focused layout for printing and presentation Perfect for sci-fi fans, spaceship collectors, and anyone who wants a bold centerpiece print.#3DPrinting #MakerWorld #STL #SciFi #Spaceship #DisplayModel #AegisDynamics #Idris #DeskDisplay #BambuLab

Just uploaded my Crystal Flex Dragon! 🐉 It’s a print-in-place articulated dragon with crystal-style scales, flexible movement, and no supports needed. I designed it to be satisfying to pose, flex, and display. Silk or dual-color filament makes it look amazing. I’d love to see your makes, colors, and feedback for the next version!

Print-in-place fabric. Full 256×256 build plate. No supports, no assembly. 🧶 I spent way too long tuning the link geometry to get this to actually *drape* — most fabric prints come out stiff. This one folds, scrunches, and makes a click-scrunch sound that's honestly addictive. **Print notes:** • 0.2mm layer height, 2 walls, 15% infill • PETG > PLA for drape • Silk filaments = best visual payoff • Do NOT scale — designed for native size Video with sound on the listing — that's where the magic is. Entered in @Stag3D's Spring Play Challenge 🏆 — if you print it, tag me, I want to see your colorways!

Print-in-place fabric. Full 256×256 build plate. No supports, no assembly. 🧶 I spent way too long tuning the link geometry to get this to actually *drape* — most fabric prints come out stiff. This one folds, scrunches, and makes a click-scrunch sound that's honestly addictive. **Print notes:** • 0.2mm layer height, 2 walls, 15% infill • PETG > PLA for drape • Silk filaments = best visual payoff • Do NOT scale — designed for native size Video with sound on the listing — that's where the magic is. Entered in @Stag3D's Spring Play Challenge 🏆 — if you print it, tag me, I want to see your colorways!

🧵 New Drop: Satisfying Fabric — Full Build Plate Edition (256×256mm)Quick story: I kept downloading "satisfying fabric" prints and scaling them up to fill my X2D plate. Every time, the result was disappointing — the links stretched out, the fabric got floppy, and that crispy ASMR click everyone loves just… disappeared. Scaling breaks the physics that make these prints satisfying in the first place.So I designed my own from the ground up — natively at 256×256mm. Link geometry, spacing, and tolerances are all dialed in specifically for full-plate scale. Not stretched. Not compromised.The result hits different:🔗 Tight, clicky links across the entire plate 🌊 Proper drape — falls like real fabric, not a stiff mesh 🎧 That satisfying clack when you scrunch it up 🖨️ Print in place — zero supports, zero assembly 📐 Sized for X1C / P1S / A1 (full 256×256 plate) 🎨 Looks incredible in silks, dual-color, or filament gradientsSlicer settings (included profile): 0.2mm layer, 2 walls, 15% grid infill, aligned seams. Tested on X2D, should work on any Bambu printer with a full-size plate.👀 What I want from you:If you print one, drop a pic in the comments — I genuinely want to see your color combos. Silk filament + multi-color especially. A Boost helps this reach more makers who'd actually appreciate a properly-scaled fabric instead of another stretched one.And tell me what's next — I'm planning a series of full-plate fabrics:🪡 Woven / twill weave 🛡️ Scale-mail (dragon scale style) 🎣 Herringbone 🧶 Knit-lookWhich one do you want first? Vote in the comments. 👇

Title: Broke your pool deck drain grate? Print one tonight — I'll show you how ────────── The grate next to my pool snapped after a few summers of sun and foot traffic. Looked up the OEM part: Waterway 642-2800. $10 + a week of shipping. Meanwhile, my 3D printer is sitting right there. So I designed a drop-in replacement. Then I went one step further: I made a SECOND version where the bottom 1" of every slot is blocked off. That raises the gutter water level by about an inch, so the skimmer pulls from a fuller channel — better surface debris pickup, less air sucked in. You literally cannot buy this version from Waterway. It only exists because someone (me) had a printer and an afternoon. ────────── 📋 Quick facts: - Print time: ~1.5 hr each - Material: PETG or ASA (NOT PLA — it'll fail outdoors fast) - Drops into any standard 2×4 Waterway/Hayward deck channel - Two screw holes, fits the original #8 hardware ────────── 🔧 Want a different size? (2×8, 9×9, custom channels) Drop a photo in the comments with the measurements and I'll see what I can do. The source file is set up so the main dimensions can be adjusted without redrawing the whole thing. Hope this saves someone a hardware-store run and a week of waiting for shipping. Pool maintenance season is here. #PoolMaintenance #ReplacementParts #FunctionalPrints #PETG #OutdoorPrints

Title: Broke your pool deck drain grate? Print one tonight — I'll show you how ────────── The grate next to my pool snapped after a few summers of sun and foot traffic. Looked up the OEM part: Waterway 642-2800. $10 + a week of shipping. Meanwhile, my 3D printer is sitting right there. So I designed a drop-in replacement. Then I went one step further: I made a SECOND version where the bottom 1" of every slot is blocked off. That raises the gutter water level by about an inch, so the skimmer pulls from a fuller channel — better surface debris pickup, less air sucked in. You literally cannot buy this version from Waterway. It only exists because someone (me) had a printer and an afternoon. ────────── 📋 Quick facts: - Print time: ~1.5 hr each - Material: PETG or ASA (NOT PLA — it'll fail outdoors fast) - Drops into any standard 2×4 Waterway/Hayward deck channel - Two screw holes, fits the original #8 hardware ────────── 🔧 Want a different size? (2×8, 9×9, custom channels) Drop a photo in the comments with the measurements and I'll see what I can do. The source file is set up so the main dimensions can be adjusted without redrawing the whole thing. Hope this saves someone a hardware-store run and a week of waiting for shipping. Pool maintenance season is here. #PoolMaintenance #ReplacementParts #FunctionalPrints #PETG #OutdoorPrints

🧵 New Drop: Satisfying Fabric — Full Build Plate Edition (256×256mm)Quick story: I kept downloading "satisfying fabric" prints and scaling them up to fill my X2D plate. Every time, the result was disappointing — the links stretched out, the fabric got floppy, and that crispy ASMR click everyone loves just… disappeared. Scaling breaks the physics that make these prints satisfying in the first place.So I designed my own from the ground up — natively at 256×256mm. Link geometry, spacing, and tolerances are all dialed in specifically for full-plate scale. Not stretched. Not compromised.The result hits different:🔗 Tight, clicky links across the entire plate 🌊 Proper drape — falls like real fabric, not a stiff mesh 🎧 That satisfying clack when you scrunch it up 🖨️ Print in place — zero supports, zero assembly 📐 Sized for X1C / P1S / A1 (full 256×256 plate) 🎨 Looks incredible in silks, dual-color, or filament gradientsSlicer settings (included profile): 0.2mm layer, 2 walls, 15% grid infill, aligned seams. Tested on X2D, should work on any Bambu printer with a full-size plate.👀 What I want from you:If you print one, drop a pic in the comments — I genuinely want to see your color combos. Silk filament + multi-color especially. A Boost helps this reach more makers who'd actually appreciate a properly-scaled fabric instead of another stretched one.And tell me what's next — I'm planning a series of full-plate fabrics:🪡 Woven / twill weave 🛡️ Scale-mail (dragon scale style) 🎣 Herringbone 🧶 Knit-lookWhich one do you want first? Vote in the comments. 👇

🧵 New drop: Satisfying Fabric — Full Build Plate (256×256) Tired of scaled-up fabrics that feel floppy and lose the click? Same. So I designed one natively at full plate size — links, spacing, and tolerances dialed in at 256×256, not scaled up. The difference is real: tight links, proper drape, ASMR-tier click across the whole plate. 🖨️ Print in place, no supports 📐 X1C / P1S sized What pattern next — woven, scale-mail, herringbone? 👇

Drop-proof phone case, printed in flexible TPU 🛡️ Unlike rigid PLA cases that crack, TPU absorbs the impact and flexes back. The chevron pattern on the back gives a nice grip so your phone stops sliding off the table. ~3 hour print, no supports needed. This is my first MakerWorld design — would love to see your prints in the comments! 🙌