Printed in PETG HF and the angle brackets didn´t fit at all. Had to scale them down to 98% to fit. Otherwise a great print, easy to mount and works well

Printed around 50 of them in PETG HF, very helpful and good print. But watch out if you use the 3D printed bambulab replika spool (https://makerworld.com/en/models/1119119-bambu-lab-spool-replica-of-original-spools#profileId-1148332), the clips don´t fit in the holes of the spool.

fits perfectly all number chips. The lid is very hard to fit on. Printing the lid at 102% fixed this issue, but maybe 101% is the sweet spot.

An updated file for newer P2S printers would be great. This one has one cover to much. Otherwise it works great.

Good print, but removing the support is really difficult in some areas. The cable clamps just straight up dont work with the original Steam-USB-cable. They are way to loose to hold the USB cable in the right spot. If you wanne charge your conntrollers this print isn´t for you.

Already printed 2 of them, I am very happy with them

Print turned out really good and fits perfectly for my "Kynup Caliper Digital".

Print turned out really good and the dice tower made our last game night playing Catan even better

Had to cut 10mm of my PTFE Tube, but after that this print worked really good.