Large Stackable Basket (Cheap)

You may want to disable your Auxiliary fan in your filament options before printing. I have had an occasional print start to warp once the model gets tall.

I've designed this basket to use the most amount of build plate space on the P1S & the least amount of filament. You can get three complete baskets out of a 1kg roll of filament.

Your build plate must be clean and free of oils to prevent failed prints.

This basket weighs a little more than 250 grams, you'll get 3 full baskets out of a 1kg roll of filament.

I use these for organizing my shelves and pantry. They can hold about 10 pounds. Carry from the bottom if you will be lifting while it is that heavy.

Make sure your filament has been dried out before attempting to print. Medium to high moisture content will ruin the top portions of the print. You should calibrate your printers bridge settings before printing this basket.