The Cross Easter Egg

Today's addition to the Easter Egg collection is The Cross Easter Egg. This miniature cross inside an Easter Egg requires some care to remove the supports as it is easy to break the cross itself. I have included the .stl and color .3mf files. I have included a free commercial license for those who would like to sell the prints.

NOTE: 3-25-25 I have uploaded a new print profile with a MUCH thicker cross and cloth. This SHOULD solve most if not all of the cross breaking issues that have been reported. Look for the profile marked .02mm layer height, 5 walls, 5% infill and read the description.
NOTE: 3-12-25 Some people have had issues removing the supports or trouble trying to paint the model. I have created a new version that should make this easier. It can be found here: https://makerworld.com/en/models/1195476-the-new-cross-easter-egg#profileId-1208053

If you STILL cannot get it to work, I have created The Assembly Cross Easter Egg. This is the same as The New Cross Easter Egg except as a kit. You can find it here: https://makerworld.com/en/models/1208500-the-assembly-cross-easter-egg#profileId-1222810

4/1/2026: One of my users created a tealight stand for their personal use, so I decided to provide a Cross Easter Egg With Tealight Stand. There are two versions here: 1. is a complete unit combining the Easter egg with the stand, 2. The other is a stand by itself for those who wish to use their current model. The combined version gives a much better interior glow to the egg. You can find it here:  https://makerworld.com/en/models/2603319-the-cross-easter-egg-with-tealight-stand#profileId-2872656

4/3/2026 I have added a Lithophane base that can be found here: https://makerworld.com/en/models/2613905-the-cross-with-lithophane-base-easter-egg#profileId-2884674