The New Cross Easter Egg by kimaul

kimaul

Art>Sculptures

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

A1 mini

0.2mm layer, 4 walls, 5% infill

Designer

3.3 h

1 plate

4.5(65)

Open in Bambu Studio

Boost

437

708

976

570

Released

Description

Some people were having issues with removing the supports from the old model. This is a completely redone Cross Easter Egg. It now has both sides open, I have increased the Z-Top distance slightly on the supports, and I have made the cross, cloth, and shell thicker. I have included some photos of how I took the supports off and the tools I used. I have included an .stl file and a color .3mf file under the Download STL/CAD Files section. This has a free commercial license for those who wish to sell their printed models.

NOTE: 3-27-25 The cross has been reinforced to reduce the chance of breakage.

Comment & Rating (80)

@infamous61

Print Profile

0.2mm layer, 4 walls, 5% infill

It took a couple tries, but I like a challenge. First attempt I grabbed the cloth instead of the support. I have done some work of my own to add a LED candle. Nice design.

@kimaul

Very cool!

@JonJonG

Brilliant with the tea light. If you upload your profile with the tea light it will be a wonderful contribution! 🙂

(Edited)

@user_735112024

Not sure if it is my printer settings for my filament, but mine had some stringing inside and left the cloth missing in a few spots. still looks good though! thanks!

The designer has replied

@kimaul

I had to dry my filament for about 18 hours before I printed. You might want to play with the temps a bit, I have done that on a few of my prints based on the filament I use (Elegoo especially needed to be raised about three degrees.)

@KneezInTheBreez

I had to manually paint supports under that cloth and slice a few times for it to get it correct. printing now with the fixed supports. I will update once completed. Here is a picture of the designers print profile that missed supports under cloth on one side. Designer will need to update their profile with supports under that side of the cloth.

@Yoteach1o1

Print Profile

0.2mm layer, 4 walls, 5% infill

very good print bed mindful removing supports and it will come out great..good job

@Ezy_T

Print Profile

0.2mm layer, 4 walls, 5% infill

Beautiful print motif 👍👍

Show original

@user_1815291001

Print Profile

0.2mm layer, 4 walls, 5% infill

It turned out great. I printed it in a rainbow silk PLA. I did have trouble removing the supports from the draped fabric part… the cross ended up breaking off right at the base, but that actually made it easier to finish removing the supports, and I just glued it back in when I was done.