Hook Holder 1 hook with 10 mm gap
Print Profile(1)
Description
A hook for jackets, coats, hats, towels, etc with gap of 10 mm or ~0.4” to hang. I have it set to 0.16 mm initial layer and variable layer height but you can up the initial layer to 0.2 or 0.24 if you having trouble with it.
Hooks with gap
1 hook with 10 mm gap
1 hook with 20 mm gap Hook Holder 1 hook with 20 mm gap
1 hook with 30 mm gap Hook Holder 1 hook with 30 mm gap
Hooks for over a door.
Link to 1 hook model Hat / Coat Hanger 1 Hook
Link to 2 hook model Hat - Coat Hanger 2 Hooks
Link to 3 hook model Hat - Coat Hanger 3 Hooks
Link to 4 hook model Hat - Coat Hanger 4 Hooks
Link to 5 hook model Hat - Coat Hanger 5 Hooks
Boost Me (for free)
Appreciate each and every boost as it helps me to replace filament and printer parts to keep creating models for upload to MW.
=======================================================================
You can also support me on Patreon and also to obtain permission for commercial use:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)