Pottery Bowl Press/Mold (parametric) - Free 3D Print Model

Search models, users, collections, and posts

mosselini1

Tools>Other Tools

IP Report

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

H2D

A1 mini

H2S

All Pieces, 0.16mm layer, 2 walls, 5% infill

Designer

2.8 h

2 plates

4.9(9)

(Untested) A1, all parts

Designer

3.5 h

2 plates

4.3(4)

(Untested) H2D, all parts

Designer

3.1 h

1 plate

5.0(1)

(Untested) A1 mini, all parts

Designer

3.3 h

2 plates

Click to see more

Open in Bambu Studio

Boost

264

1025

338

185

Released

Description

You can change the dimensions (tolerances for example) of this model in fusion360 through parameters.

Since the base and handle are detachable, you can use this model as a press (use plastic or cloth in between the model and your clay for better results), or you can lay the clay onto the model (and form it around it) and use it as a mold.

Printing Information:

Print the base upside down (flat side down)
Print the handle and the connector upright
Use a brim to support the tall pieces by increasing their adherence to the printbed
Use regular supports to support the top of the connector holes while printing

Inspired by BENECREAT Pottery Moulds

Comment & Rating (41)

@MoonAndCauldron

Apreciate that the A1 mini is there, however it prints the hole to connect in at a non-useable thinness. I was able to use just the base for my purposes without connecting the handle.

The designer has replied

@mosselini1

Hello, do you mean that you can't insert the connector into the hole (the tolerance is too tight)? In practice, there is no difference in size in the profiles, maybe it is due to slight differences in the precision of the machine, it could also be due to the filament, a need for calibration, ... . You can always resize the connector in X and Y to 99% for example or sand your actual connector a bit down. That's the issue with me not having an A1 mini, I added a profile for another user to help and it seemed fine at the time but I can't check personally, sorry for the inconvenience.

@MoonAndCauldron

Replying to @mosselini1 :

Yeah, the hole was basically non-existent

@mosselini1

Replying to @MoonAndCauldron :

Hello, I don't really understand this statement, the hole can be seen in your image, you just need to remove the supports in the center for it to exist. I could understand if you said it is slightly too small, but non-existent is odd. In the slicer, everything seems fine for the A1 mini 3mf. In the image I've attached, the supports are in green and once removed, the hole seems to be the correct size. Could you perhaps send a picture of the connector next to both holes to see how much needs to be removed? I will send you a custom file if you are interested.

@OmerCanBastas

Boosted

Print Profile

(Untested) H2D, all parts

Thank you for this great model. It's printed perfectly.

The profile uploader has replied

@mosselini1

Glad that everything worked fine :). As a bonus, now that you have tested the profile, people will be less scared to try it as well which is great.

(Edited)

@PolyReelStudio

Print Profile

(Untested) A1, all parts

connection between two pieces could be simplified

@user_1348005414

Could you add a profile for the A1? Thank you

The designer has replied

Show original

@mosselini1

Hello, I don't have the machine, but I still made one for you. I hope everything works fine. I added a disclaimer as it is untested for now but everything should work in theory.

@WUVIE

Boosted

Replying to @mosselini1 :

Hello, I printed this today, and it looks pretty good. Since I will be using fabric between the press and the clay, the little bits that came out scruffy shouldn't matter too much, it was the shape I was after. I am a doofus, so I didn't quite understand how the handle and the other sticks that printed were supposed to go, so I have since corrected the handle, but the photo I'm sharing is incorrect. Thank you for making this for an A1!

@user_4268419647

can you add H2S ?

The designer has replied

@mosselini1

Hello, no problem, I just added one for you :) (you might need to click "click to see more"). Like I said to the previous similar cases, beware that I wasn't able to test it myself but I think it should still work. An added complication however is that starting of May, new rules will be enforced and all these print profiles I made will be at risk of being removed, sadly. If you can, please send a picture that I can use on the H2S profile, this way it will be less likely that its gets removed. I don't care for the points, it's just sad that users will lose this option :/ .

(Edited)

@user_4268419647

thanks! I’ll send pics

@manman3781

I'm new to this app and bambu printers it's says the filament in the profile is petg if I put that my printer is using pla will it work or is that something I have to do out of the app?

The designer has replied

@mosselini1

Hi, it's important that your settings match what's in your printer as it will set the speed, temperature, ... for the selected filament, for example. You can change the filament in bamby handy and bambu studio easily by clicking on it and changing to your preferred filament, the app should adapt to it. Here is a helpful link for the bambu handy app (see at the end for what you need) as it is a bit less intuitive: https://wiki.bambulab.com/en/makerworld/tutorials/printing-tutorial-on-bambu-handy Should you be unable to do it, I can upload a new profile for your preferred filament type and printer if you give me this information.

@manman3781

Replying to @mosselini1 :

thank you so much

@jyn_c

can you add a version for a1 mini? thank you!

The designer has replied

@mosselini1

No problem, here you go. Like I said to the others : I don't have the machine, but I still made one for you. I hope everything works fine. I added a disclaimer as it is untested for now but everything should work in theory. Enjoy :)

@jyn_c

Replying to @mosselini1 :

really appreciate it!

@OmerCanBastas

Boosted

can you add for h2d?

The designer has replied

@mosselini1

Oh wow, that's a first... , but sure, no problem, I am gladly helping you out. I don't have an h2d machine, but I still made one for you. I hope everything works fine. I added a disclaimer as it is untested for now, but everything should work in theory. Please learn to use a slicer however nevertheless as to not waste the huge potential of your high-end machine :'( .

@OmerCanBastas

Boosted

Replying to @mosselini1 :

bought it couple of days ago and first printing online stuff. I will start designing soon.

@user_12985769

Print Profile

All Pieces, 0.16mm layer, 2 walls, 5% infill

Very good print. Suggest more infill to stand up to the rigors of clay shaping

@user_2389477908

A1Mini user here, it works fantastically!! Printed as separate pieces as per directions. Amazing!!! Thank you!!!

The designer has replied

@mosselini1

Great! Thank you very much for this comment, as I wasn't understanding why this profile specifically wouldn't work properly (unlike the others) as some other users implied.