USB CABLE GUIDE FOR A1
Copyright Claim
USB CABLE GUIDE FOR A1
Boost
164
261
116
Print Profile(3)
0.2mm layer, 2 walls, 30% infill
Designer
30 min
1 plate
0.2mm layer, 2 walls, 30% infill
Designer
29 min
1 plate
PLA 0.20mm Separated part print
15 min
1 plate
Open in Bambu Studio
Boost
164
261
116
21
613
392
Released
Description
The A1 series printers have a USB-C cable connected to the toolhead, designed to clip with the filament PTFE tubes. However, due to the random placement of the AMS or the auxiliary spool, the PTFE tubes may not be in the recommended position as suggested in the official document. This can cause the USB-C cable to get caught on moving parts or the gantry, potentially leading to the toolhead getting jammed and print failure.
My USB cable guide can solve this problem by supporting the cable to keep it in a perfect shape! This simple support piece only takes 30 minutes to print. Enjoy peace of mind and happy printing!
Comment & Rating (116)
All
I was afraid of breaking it, trying to attach it, but it eventually went on. Seems to work just fine. Thanks!
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
Printed perfect. Works flawlessly. Thank you very much for this share.
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 30% infill
prints well in petg
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 30% infill
Nice model, works perfectly as intended
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 30% infill
came out great thanks for sharing with us works perfectly
0
Reply
Print Profile
PLA 0.20mm Separated part print
nice quick print that should prevent damage
(Edited)
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 30% infill
This finally solved the loose usb cable problem. Thanks a lot.
0
Reply
Boosted
Print Profile
PLA 0.20mm Separated part print
printed good
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
per il momento funziona alla grande, sono gia passate diverse ore di stampe ed è ancora molto stabile! ho aggiunto solo una piccola fascetta per aiutare a sostenere il cavo nella parte posteriore
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
quick easy print.. does exactly as described 😁👍🏻
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRemixes (1)
© 2024 MakerWorld