Type 97 Chi-Ha

The Type 97 Chi-Ha (九七式中戦車 チハ, Kyūnana-shiki chū-sensha Chi-ha or simply "Type 97/57") was a medium tank used by the Imperial Japanese Army during the Second Sino-Japanese War, the Battles of Khalkhin Gol against the Soviet Union, and the Second World War.

Print can be resized on the y and x axis only. keep the height the same to make sure colours are correct!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x83.16mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA Default White Transmission Distance: 5
    PLA PolyLite Black Transmission Distance: 0.3
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue
    At layer #15 (1.28mm) swap to Yellow
    At layer #21 (1.76mm) swap to White

Border Only Colors from here until the end.
    At layer #26 (2.16mm) swap to Black for the rest.