dummy 13 TYPE F on a kit card Remixed by NeptuneMakerWorld: Download Free 3D Models

Remixed by

Neptune

Toys & Games>Other Toys & Games

IP Report

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

0.1mm layer, 2 walls, 15% infill

Designer

4 h

2 plates

4.5(146)

repaired scale, 0.1mm layer, 2 walls, 15% infill

4.9 h

2 plates

4.2(12)

Open in Bambu Studio

Boost

1146

2225

249

182

4.1 k

1.9 k

Released

Description

looking for something extraordinary when searching up dummy 13 look no further with the new dummy 13 type f, a female version now including pieces from the dummy 13 v1 made to be Beter and work more reliable

if you want there is a male version go check out my page for my other models.

The changes that I have made to this model includes putting all of the separate parts onto a kit card making it easier and more beginner friendly to print.

I give attribution to @ewandrowsky_2057951 on printables for the mod

https://www.printables.com/model/911499-dummy-13-type-f-compiled-mods

I also give attribution to Lucky 13 Toys for the dummy 13 v1 parts for this model

Dummy 13 - version 1.0! by Lucky 13 Toys - MakerWorld

also, a big thankyou to szprusa on printables for the photos you can find him here→ szprusa | Printables.com

Bill of Materials

Bambu Filaments

Ivory White

A01-W2-1.75-1000-SPLFREE

19.99 USD

× 1

Sakura Pink

A01-P3-1.75-1000-SPLFREE

19.99 USD

× 1

Black

A00-K0-1.75-1000-SPLFREE

19.99 USD

× 1

Buy Now

Download BOM

Comment & Rating (249)

@Mundragun

I've tried 3x with different scales but I really couldn't get the armour plate to print properly. I did it with 150% no support and failed, I tried 150% with the manual support profile and it failed, I've tried the auto support with just the critical areas and that failed too so idk if I am doing something wrong but I am trying to do this a Load and Print stuff without tinkering much. If anybody can help me with this issue - I would greatly appreciate it!

@user_2351837518

I would clean the build plate and add brim, a bit more work, but should work.

@user_817821214

same problem

@user_3794307188

Yes my one also did that, it doesn't print I've tried different colours and filament but still no luck.

@Zekker

Print Profile

0.1mm layer, 2 walls, 15% infill

Thank you for this model!! Prints pretty nice and give freshness to dummy 13.

The profile uploader has replied

@nepune

thanks mate 🤙

@pnx_jw

That's so cool

Show original

@Notlock

I think this is the. Wrong one

@wallabyintights

almost was able to print it all well but the same two pieces kept failing, despite my attempts to have a nice clean plate.

@user_3832639286

same

@Airikr

same

@user_3464321297

Same here. Mine even worse.

@Vincentchi

Moderator, please assist me in improving this situation

The designer has replied

Show original

@nepune

I am very sorry this was a recent mistake I had just updated the files and I accidentally added 2 of the same piece I have fixed this now and thank you very mutch for bringing this to my attention

@KalaiKing

Print Profile

repaired scale, 0.1mm layer, 2 walls, 15% infill

Support Issue:The 2 Parts in the middle don't get support

@white_fang

me to it’s messed up man

@thunder3dprint

wash ur build plate

@KILLAPRINTS3D

The print profile is no longer public

Printed great.

@notarickroll

Boosted

woah what filament is that? looks amazing!

@KILLAPRINTS3D

Replying to @notarickroll :

Polymaker Panchroma PLA Filament, Luminous Rainbow

@notarickroll

Boosted

Replying to @KILLAPRINTS3D :

thanks soooo much!

@gooseythecop

my first layer will not stay I cleaned the build plat I added brims and more it will not stick

The designer has replied

@nepune

you probably need to clean your build plate

@gooseythecop

Replying to @nepune :

I did

@chocksy

Print Profile

0.1mm layer, 2 walls, 15% infill

This is the 3rd time i print this. My girls love it. Only issue is that i think this uses an older version of the dummy 13 original before v1 and sometimes the hands or other pieces get caught. Its much better than the others though.

The profile uploader has replied

@nepune

thanks mate and I will be updating it soon to include the updated files

@Woogie

Replying to @nepune :

How soon are we talking? 😁

@nepune

Replying to @Woogie :

like from the 26 to the 27 September

@mxkoty118

Boosted

Print Profile

0.1mm layer, 2 walls, 15% infill

works perfectly

@Airikr

Print Profile

0.1mm layer, 2 walls, 15% infill

it started as many others - pro lema with the two parts in the middle. then this happened. plate was clean, this have never happened to me before. Will try again but with A LOT of support, kiddo wants it done 😄