Super Mario Magnet Grass

This Mario set was designed by @benchymaker and some of the other pieces can be found here: https://makerworld.com/en/models/555893-super-mario-fridge-magnets?from=search#profileId-474659

I loved it so much, that I decided to expand on it a bit with grass/dirt to stand on, the Piranha plant and other subsequent pieces.

I designed the grass and Piranha, but I couldn't post the Mushroom, Peach, Goomba, Bowser, Coin, as they are others works, but if you want to make them too, I uploaded print profiles under these files: 

Original: https://makerworld.com/en/models/555893-super-mario-fridge-magnets?from=search#profileId-474659

Piranha plant file: https://makerworld.com/en/models/1165846-piranha-plant-magnet#profileId-1173136

Mushroom: https://makerworld.com/en/models/13158#profileId-14451

Peach: https://makerworld.com/en/models/401313#profileId-302810 (use 0.2mm nozzle)

Bowser: https://makerworld.com/en/models/58950#profileId-60836 

Goomba: https://makerworld.com/en/models/892448#profileId-849246

Coin: https://makerworld.com/en/models/576456#profileId-497039

If you use other magnet sizes, just be sure to compensate for the Z-height of the model if the magnet hole is too tall. i.e., scale in only the Z direction

I used 6x3mm and 8x2 magnets for the bowser and coin pieces, but you can adjust the size of the magnets in Bambu Studio if you would like to use other sizes

I used Bambu matte grass green, matte desert tan, matte latte brown, and Elegoo brown (for the grass)