Aorus RTX 2070 Gaming Box Dual 75mm Fan Adapter

This is a Dual 75mm Fan Adapter for Gigabyte Aorus RTX 2070 Gaming Box GPU. 

The stock fan is not bad, but if it breaks, finding a new one is very problematic. Also with the stock fan you can't install this GPU to a motherboard in regular way, since the fan is too large (it's wider than the board).

The idea came to me right after I started hearing the "shhhh… khsshhhh…" sound from the stock fan. But back in that days I haven't had a 3D Printer (Sad Face). Now I do, so I turned my idea to reality (LOL). With this adapter this GPU can be installed in any "classic" PC towers or almost any ITX case. 

This adapter allows you to:
- Install 2 fans with a diameter of up to 75 mm with a mounting diameter of 40 mm; 
- Improve the temperatures of the video card;
- Use the video card in any PC builds, since the fans no longer protrude beyond the board.

Note that fan control from GPU board is hardcoded to the GPU firmware and will not allow some fans to run at full speed, so it's better to use any fan connector on your motherboard to plug your new gpu fans! 

I'm using two PLD08010S12HH fans from triple fan set from another Gigabyte GPU that can be found at AliExpress.

For the fan speed control I use Fan Control app.

Regardig the GPU temperatures: my 2070's GPU Core Temp dropped from 103° C to 91° C under stress test without any undervolt. So you can expect same results, I guess.

Attention! Don't forget to check your Precision Settings of X-Y hole and contour compensation to fit the mounting holes!