Card Press

For selling membership

https://buymeacoffee.com/kreepa

1/31/2026 update

Removed the original print file with the smaller bolt and kept the larger bolt model which is better quality and increased for strength since people where STILL downloading the original and not the updated version and leaving negative reviews about something that was already address and failed to read these updates. :)

10/13/2025 update

See version “Card Press v2.0” as the new print profile for bigger bolt and upgraded box. Feel Free to increase infill and to gyroid for stronger rigidity. Thicker bolt, increased dimensions on walls and top section to accommodate more pressing force. It is recommended you use PETG for stronger dynamics. However PLA works for me just fine. Doesn't need a lot of force. Just time and patience. Thanks everyone for their feedback to help me make this a better item

3/20/2025 update: 

Thanks to feedback on this model, I have changed the strength profile of this to increase its rigidity. The changes are as follows:
- Sparse infill density increased to 35%
- Sparse infill pattern changed to Gyroid
- Bolt moved closer to card press box on print plate to allow less travel across the plate to print it.

These changes should reduce stress on the box and more likely to prevent the bolt from breaking from too much force being applied to it. 

Original Post:

Made for double sleeves or foil cards, helps remove the extra air trapped inside extra sleeves or revert foil cards and give it more of a flat memory. 

Fits 100 double sleeved +

No Supports needed