1/18 Scale Paddle Tires - Arrma Typhon Grom 223S

My brother wanted some paddle tires for his Typhon. They make this little beast work pretty nicely on loose dirt and grass. I haven't tested sand or snow yet though. You'll defiantly want to print these out of TPU.
The 10 fin might be a little overkill so I included a 6 fin variant. 

Edit 1/5/25:

I got the chance to test both the 6 fin and 10 fin on snow. They both work great. The only noticeable difference is that the 10 fin had a smoother ride than the 6 fin. I still have to try on sand eventually.

Need a 1/10 scale paddle tire? Try my Slicers! - 1/10 Scale RC Paddle Tires

Printing + Instal:

• The Paddle_Tire .stls should be printed with at least 4 walls and 7% infill. (the less infil you use the more "give" the tires will have).
• The settings for inner_hub.stl doesn't matter all that much, at least 3 walls.
• The tolerances between the tires and inner hub are 0.00mm. This (in theory) lets you stretch the TPU onto the hub. YOU STILL NEED TO USE GLUE. (very important) Superglue works, epoxy is better though

If you want to go a step further than that, I'd be beyond thrilled if you left me a tip on my Thingiverse page :D