NekrosMataro

Multiple pieces - Project helper

MartinAP1S

Set of each part once

could you please let me know, what went wrong with the printprofile?
Please rate the model instead of my profile, if thats the core of your issue :)
Thanks!

VikingWithBeard

you can just bend them, look in youtube. And if you want it fully configurable you have to buy COB leds

How did you create the splits in the addressable LED strips? Did you just split the LED strip and mirror the data line between the two connections? I want to find a way to keep LED truly individually addressable

Joey Hyperion

Creations By Clark

Would this work for lighting in the closet?  Just wondering how bright the leds are.

user_1951111055

Vavik

not interlocking, kind of hard to mount and lineup

user_3494154252

Das ganze wäre eine super Idee, leider wird alles nur lose zusammengesteckt. Wie soll das halten? Muss es verklebt werden? Generell wäre eine etwas ausführlichere Beschreibung und aussagekräftige Bilder wünschenswert. 

The whole thing would be a great idea, unfortunately everything is just loosely put together How is that supposed to hold Does it need to be glued Generally, a slightly more detailed description and meaningful pictures would be desirable

user_265993412

JamFizzle

westpsyde

cover

Star x6

plate_1.png

Starcover x6

plate_2.png

corner x10

plate_3.png

Edgecover x10

plate_4.png

Edge x10

plate_5.png

cornercover x14

plate_6.png

Screenshot 2025-03-27 151907.png

WhatsApp Image 2025-03-27 at 15.14.00 (1).jpeg

WhatsApp Image 2025-03-27 at 15.14.00.jpeg

Screenshot 2025-03-27 151850.png

Print this for your project.  Has all the pieces you need to build a few Hexagons, print multiple plates for bigger sizes. Please wash your printplate with dishsoap and clean it with isopropyl alcohol for best results - this prints on a big surface, if your plate is touched with fingers, it may leafe defects of poor plateadhesion. takes a bit to print, fitment is great - dont print in PLA, take PETG or ABS for its heatresistence - electronics get warm

Screenshot 2025-03-27 151151.png

Screenshot 2025-03-27 151203.png

each part once, if you want to make yourself a picture of this model. If you want to build this project, look at my other profile please. don&#39;t print in PLA - Electronics can get warm.  Printed it in PETG, ABS would be superior

Designed a Hex Grid Light System to create your own grid in any configuration &nbsp;order 10 Meters of Adressable LED Strips and SP110 LED Controller along with a 5v supply &nbsp;parts were around 30 for LEDs and it took about 1 roll of filament

Print Profile(2)

Description

Comment & Rating (20)

License

Related Models

RGB LED HEX GRID

Print Profile(2)

Description

Comment & Rating (20)

License

Related Models