David Tao Black Tangerine Album Cover
Print Profile(2)
Description
黑白版本：
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 80x80mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 0.88mm and the Actual Depth is 0.96mm
Filaments Used:
PLA BambuLab Matte Charcoal (PLA Black Matte) Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 2 unique filaments
Swap Instructions:
Start with Charcoal (PLA Black Matte)
At layer #5 (0.48mm) swap to Jade White for the rest.
彩色版：
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 100x100mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 3mm and the Actual Depth is 3mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 7
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal
At layer #14 (1.2mm) swap to Ivory White
At layer #19 (1.6mm) swap to Lemon Yellow
At layer #28 (2.32mm) swap to Orange for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)