Sovol SV08 Door Handles & Hinge Set
Print Profile(1)
Description
Boost Me (for free)
As always, I would be very grateful for a boost!
You help me a lot by supporting my work.
Here is my design for door hinges and handles for the Sovol SV08.
Unlike the original hinges, the doors can be opened 180 degrees.
And the whole thing can be attached to the original holes.
You only need 4* M3x20mm screws that are screwed in as hinges.
You should also place an M3 washer between the parts.
To attach the plates, you need to melt 2* M3 embedded nuts into the holder.
Then the plate can be attached with 2* M3x8mm screws.
To attach the lower hinge, you must first unscrew the long screw from the housing, then insert the hinge and secure it with the large screw!
The knob of the upper plate (without embedded nuts) is also attached with 2* M3x8mm screws.
Everything is clearly visible in the pictures. ;)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (14)