Ecoflow river 2 cable storage (removable) - Free 3D Print Model

Search models, users, collections, and posts

Erik

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 6 walls, 25% infill

Designer

3.1 h

1 plate

5.0(12)

Open in Bambu Studio

Boost

264

198

124

Released

Bill of Materials

Bambu Filaments

Select all

ABS

Black (45101) / Filament with spool / 1kg

ASA

Gray (45102) / Filament with spool / 1kg

ASA

Description

I made a Bin to fit my most used cables.

It can fit on the back of the Ecoflow River2 with double sided tape i would recomend VHB tape.

It is with hooks so you can take the bin off if you dont need it.

I printed in ABS but have also a file for PLA.

ecoflow river 2

cable management

cable bin

Comment & Rating (19)

@g.papadimitro

Print Profile

0.2mm layer, 6 walls, 25% infill

Convenient and easy print

@james.flores

Just what I needed! I didn't use the hooking mechanism, but instead just used some 3M strips to mount it into place.

@jarryd.sloan94

Boosted

Print Profile

0.2mm layer, 6 walls, 25% infill

good design. easy to connect and lasted the whole weekend of abuse so would say it's a solid design :)

@user_2484494091

Print Profile

0.2mm layer, 6 walls, 25% infill

great addon for my ecoflow river 2 pro! it printed so nice and it fits like it was build from factory. I use to store multiple usb cables. I wonder if can be re-designed including a cable management system for usb cables.

@user_283440912

Cura reports that no models are found in the files

The designer has replied

Show original

@imadeit

I can download and print in bambu studio

@CommentRedacted

good job, works great. The pin clip on system you have works surprisingly well also. i was able to print this on an A1 mini also, had to angle the bin to fit the build plate and then print the pin lock brackets seperate but it turned out fine. The only suggestion I have is maybe add a small slot so you can feed a velcro tie-strap through the top to help hold the wires in the bin. I haven't had any cables fall out but would be a decent addition I would think. thumbs up for you.

(Edited)

@5thumbs

Nice design. Thank you for sharing. I printed it out for my Ecoflow River pro. I like how I can remove the main try.

@user_366470795

Print Profile

0.2mm layer, 6 walls, 25% infill

Fit perfectly also on a Ecoflow River 2 Max.

@ThatGuy88

Print Profile

0.2mm layer, 6 walls, 25% infill

would suggest scaling the width out a bit. it's a very tight fit for the cable

@user_843995093

Print Profile

0.2mm layer, 6 walls, 25% infill

very good print

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.